Skip to content

← All articles

17 min read

Rate Equations Explained: How to Determine the Order of a Reaction and the Rate-Determining Step (A Level Chemistry 2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

Rate equations are one of the most mathematical topics in A Level chemistry. Students often find it hard to work out orders from data, get the units of the rate constant wrong, or confuse the overall equation with the rate equation. But every rate equation question follows the same logic, and once you’ve learned it, kinetics becomes one of the most reliable topics on the paper.

This guide explains rate equations step by step. It covers orders of reaction, the rate constant and its units, how to determine the order of a reaction using initial rates and graphs, half-life, the rate-determining step and how to link rate equations to mechanisms. It also covers the Arrhenius equation, common mistakes, and practice questions with answers.

Quick summary: rate equations in one minute

  • Rate equation: rate = k[A]ᵐ[B]ⁿ
  • Orders (m and n) show how the rate depends on each concentration. They must be found by experiment, not from the balanced equation.
  • Zero order: Changing the concentration has no effect on the rate.
  • First order: Doubling the concentration doubles the rate.
  • Second order: Doubling the concentration quadruples the rate.
  • Rate-determining step: The slowest step in a mechanism. The species in the rate equation are the ones involved in, or before, this step.
  • The rate constant, k, changes with temperature but not with concentration.

What Is a Rate Equation?

The rate of reaction is the change in concentration of a reactant or product per unit time. Its units are usually mol dm⁻³ s⁻¹.

A rate equation shows how the rate depends on the concentrations of the reactants. For a reaction involving reactants A and B:

rate = k[A]ᵐ[B]ⁿ

  • [A] and [B] are the concentrations of A and B, in mol dm⁻³.
  • m is the order of reaction with respect to A.
  • n is the order of reaction with respect to B.
  • k is the rate constant.
  • m + n is the overall order of the reaction.

The Most Important Rule

Orders of reaction can only be found by experiment. They can’t be worked out from the balanced equation.

For example, the acid-catalysed reaction between propanone and iodine has this overall equation:

CH₃COCH₃ + I₂ → CH₃COCH₂I + HI

But its rate equation, found by experiment, is:

rate = k[CH₃COCH₃][H⁺]

Iodine doesn’t appear in the rate equation at all, even though it’s a reactant. And H⁺, a catalyst, does appear. This shows why you can never assume the orders from the balanced equation.

Orders of Reaction Explained

At A Level, orders are usually 0, 1 or 2.

Zero Order

rate = k[A]⁰ = k

  • Changing the concentration of A has no effect on the rate.
  • If you double [A], the rate stays the same.

First Order

rate = k[A]

  • The rate is directly proportional to the concentration of A.
  • If you double [A], the rate doubles.
  • If you triple [A], the rate triples.

Second Order

rate = k[A]²

  • The rate is proportional to the square of the concentration of A.
  • If you double [A], the rate quadruples (×4).
  • If you triple [A], the rate increases nine times (×9).

Quick Rule for Working Out Orders

If the concentration of a reactant is multiplied by a factor, and everything else stays the same:

  • Rate unchanged → zero order
  • Rate changes by the same factor → first order
  • Rate changes by the factor squared → second order

The Rate Constant, k

The rate constant, k, links the rate to the concentrations in the rate equation.

Key Facts About k

  • k is constant for a reaction at a given temperature.
  • Changing concentration doesn’t change k.
  • Increasing temperature increases k, so the rate increases.
  • A larger k means a faster reaction.
  • Adding a catalyst also increases k, because it provides a route with a lower activation energy.

How to Work Out the Units of k

The units of k depend on the overall order. Use this method:

  1. Rearrange the rate equation to make k the subject.
  2. Substitute the units: rate in mol dm⁻³ s⁻¹ and each concentration in mol dm⁻³.
  3. Cancel the units.

Units of k for Each Overall Order

  • Zero order overall: mol dm⁻³ s⁻¹
  • First order overall: s⁻¹
  • Second order overall: dm³ mol⁻¹ s⁻¹
  • Third order overall: dm⁶ mol⁻² s⁻¹

Worked Example: Units of k for a Second-Order Reaction

rate = k[A][B]

  1. Rearrange: k = rate ÷ ([A][B])
  2. Substitute units: k = (mol dm⁻³ s⁻¹) ÷ (mol dm⁻³ × mol dm⁻³)
  3. Cancel one mol dm⁻³: k = s⁻¹ ÷ (mol dm⁻³) = dm³ mol⁻¹ s⁻¹

Tip: Moving a unit from the bottom of a fraction to the top changes the sign of its power. That’s why mol dm⁻³ on the bottom becomes mol⁻¹ dm³ on top.

How to Determine the Order of a Reaction: The Initial Rates Method

The initial rates method is the most common way exam questions ask you to find orders.

How It Works

  1. Carry out the reaction several times, changing the concentration of one reactant at a time.
  2. Measure the initial rate for each experiment.
  3. Compare pairs of experiments where only one concentration changes.
  4. Use the change in rate to deduce the order with respect to that reactant.

Worked Example 1: Finding the Rate Equation

For the reaction A + B → products, these results were obtained at the same temperature:

Experiment 1: [A] = 0.10 mol dm⁻³, [B] = 0.10 mol dm⁻³, initial rate = 2.0 × 10⁻⁴ mol dm⁻³ s⁻¹

Experiment 2: [A] = 0.20 mol dm⁻³, [B] = 0.10 mol dm⁻³, initial rate = 4.0 × 10⁻⁴ mol dm⁻³ s⁻¹

Experiment 3: [A] = 0.10 mol dm⁻³, [B] = 0.20 mol dm⁻³, initial rate = 8.0 × 10⁻⁴ mol dm⁻³ s⁻¹

Step 1: Find the order with respect to A

Compare experiments 1 and 2. [B] stays the same, and [A] doubles. The rate doubles (2.0 → 4.0 × 10⁻⁴).

So the reaction is first order with respect to A.

Step 2: Find the order with respect to B

Compare experiments 1 and 3. [A] stays the same, and [B] doubles. The rate quadruples (2.0 → 8.0 × 10⁻⁴).

So the reaction is second order with respect to B.

Step 3: Write the rate equation

rate = k[A][B]²

The overall order is 1 + 2 = 3.

Step 4: Calculate k

Use any experiment. With experiment 1:

k = rate ÷ ([A][B]²)
k = (2.0 × 10⁻⁴) ÷ (0.10 × 0.10²)
k = (2.0 × 10⁻⁴) ÷ (1.0 × 10⁻³)
k = 0.20 dm⁶ mol⁻² s⁻¹

Step 5: Check with another experiment

Experiment 3: 0.20 × 0.10 × 0.20² = 0.20 × 0.10 × 0.040 = 8.0 × 10⁻⁴ mol dm⁻³ s⁻¹ ✓

Worked Example 2: Predicting a Rate

Using the rate equation and k from Worked Example 1, calculate the initial rate when [A] = 0.30 mol dm⁻³ and [B] = 0.30 mol dm⁻³.

rate = 0.20 × 0.30 × 0.30²
rate = 0.20 × 0.30 × 0.090
rate = 5.4 × 10⁻³ mol dm⁻³ s⁻¹

Worked Example 3: When Two Concentrations Change at Once

Sometimes no pair of experiments changes only one concentration. Then you need to use an order you already know.

A reaction is first order with respect to C. Two experiments give these results:

Experiment 1: [C] = 0.10 mol dm⁻³, [D] = 0.10 mol dm⁻³, rate = 1.5 × 10⁻³ mol dm⁻³ s⁻¹

Experiment 2: [C] = 0.20 mol dm⁻³, [D] = 0.20 mol dm⁻³, rate = 6.0 × 10⁻³ mol dm⁻³ s⁻¹

Step 1: The overall rate increased by a factor of 6.0 ÷ 1.5 = 4.

Step 2: [C] doubled, and the reaction is first order in C, so C accounts for a factor of 2.

Step 3: The remaining factor is 4 ÷ 2 = 2. [D] also doubled, and the rate doubled because of D, so the reaction is first order with respect to D.

Rate equation: rate = k[C][D]

How to Determine the Order of a Reaction From Graphs

Concentration–Time Graphs

A concentration–time graph shows how the concentration of a reactant changes during a reaction.

  • Zero order: A straight line sloping downwards. The rate (the gradient) stays the same.
  • First order: A curve that falls steeply then levels off. It has a constant half-life.
  • Second order: A curve that falls even more steeply at first, then levels off more slowly. Its half-life increases as the reaction goes on.

Finding the rate from a concentration–time graph: Draw a tangent to the curve at the time you’re interested in, and calculate its gradient. The rate is the size of the gradient. To find the initial rate, draw the tangent at t = 0.

Rate–Concentration Graphs

A rate–concentration graph plots the rate against the concentration of one reactant.

  • Zero order: A horizontal straight line. The rate doesn’t change with concentration.
  • First order: A straight line through the origin. The rate is directly proportional to concentration. The gradient equals k.
  • Second order: An upward curve (a parabola) through the origin.

Exam tip: A straight line through the origin on a rate–concentration graph is first order. Students often confuse this with a zero-order concentration–time graph, which is also a straight line. Always check the axes.

Half-Life and First-Order Reactions

The half-life (t½) is the time it takes for the concentration of a reactant to fall to half its starting value.

The Key Fact

First-order reactions have a constant half-life. The time taken for the concentration to halve is the same, whatever the starting concentration.

How to Use Half-Life to Identify a First-Order Reaction

On a concentration–time graph, measure the time for the concentration to halve, then halve again. If both times are the same, the reaction is first order.

Calculating k From Half-Life

Some exam boards require you to use this equation for first-order reactions:

k = ln 2 ÷ t½ (where ln 2 ≈ 0.693)

Worked Example 4: Half-Life

The concentration of a reactant halves every 40 s, regardless of its starting concentration. Find the order and the rate constant.

  • The half-life is constant, so the reaction is first order.
  • k = 0.693 ÷ 40 = 0.0173 s⁻¹

Experimental Methods for Measuring Rates

Rate equation questions often refer to how the data was collected.

Continuous Monitoring

You measure a property that changes during the reaction, at regular intervals:

  • Volume of gas produced, using a gas syringe
  • Loss of mass, as a gas escapes
  • Colour change, using a colorimeter
  • pH change, using a pH meter

This produces a concentration–time graph.

Clock Reactions

In a clock reaction, you measure the time taken for a fixed amount of reaction to happen, often signalled by a sudden colour change. The initial rate is proportional to 1/time. A faster reaction gives a shorter time.

The iodine clock reaction is a well-known example, where a blue-black colour appears suddenly.

The Rate-Determining Step

What Is the Rate-Determining Step?

Most reactions happen in several steps, called the mechanism. The rate-determining step is the slowest step in the mechanism. It controls the overall rate of reaction, just as the slowest worker on a production line controls the output.

  • Species that appear in the rate equation are involved in the rate-determining step, or in a step before it.
  • Species that react after the rate-determining step don’t appear in the rate equation. They have zero order.
  • The order with respect to a species often equals the number of molecules of that species in the rate-determining step (and any steps before it).

Worked Example 5: Nitrogen Dioxide and Fluorine

Overall equation: 2NO₂ + F₂ → 2NO₂F

Rate equation (from experiment): rate = k[NO₂][F₂]

Proposed mechanism:

  • Step 1 (slow): NO₂ + F₂ → NO₂F + F
  • Step 2 (fast): NO₂ + F → NO₂F

Why this fits:

  • The rate equation contains one NO₂ and one F₂, which matches the slow step.
  • The second NO₂ reacts in the fast step, after the rate-determining step, so it doesn’t appear in the rate equation.
  • The two steps add up to the overall equation: 2NO₂ + F₂ → 2NO₂F. (The F atom cancels.)

Worked Example 6: Nitrogen Dioxide and Carbon Monoxide

Overall equation: NO₂ + CO → NO + CO₂

Rate equation (from experiment): rate = k[NO₂]²

Carbon monoxide doesn’t appear in the rate equation, so it must react after the rate-determining step.

Proposed mechanism:

  • Step 1 (slow): 2NO₂ → NO₃ + NO
  • Step 2 (fast): NO₃ + CO → NO₂ + CO₂

Why this fits:

  • The slow step involves two NO₂ molecules, which matches the second order with respect to NO₂.
  • CO reacts in the fast step, so it has zero order.
  • Adding the steps and cancelling NO₃ and one NO₂ gives the overall equation: NO₂ + CO → NO + CO₂.

Worked Example 7: Hydrolysis of Halogenoalkanes (SN1 vs SN2)

This example links rate equations to organic mechanisms.

Primary halogenoalkane: CH₃CH₂Br + OH⁻ → CH₃CH₂OH + Br⁻

Rate equation: rate = k[CH₃CH₂Br][OH⁻]

Both reactants appear, so both are involved in the rate-determining step. This fits a one-step mechanism (SN2), where OH⁻ attacks as Br⁻ leaves.

Tertiary halogenoalkane: (CH₃)₃CBr + OH⁻ → (CH₃)₃COH + Br⁻

Rate equation: rate = k[(CH₃)₃CBr]

OH⁻ doesn’t appear, so it reacts after the rate-determining step. This fits a two-step mechanism (SN1):

  • Step 1 (slow): (CH₃)₃CBr → (CH₃)₃C⁺ + Br⁻
  • Step 2 (fast): (CH₃)₃C⁺ + OH⁻ → (CH₃)₃COH

For more on these mechanisms, read our guide to organic reaction mechanisms.

How to Propose a Mechanism From a Rate Equation

  1. Identify the species in the rate equation. These must be in the rate-determining step, or before it.
  2. Use the orders to decide how many of each species are in the rate-determining step.
  3. Write the slow step using these species.
  4. Write fast steps that use the remaining reactants to form the products.
  5. Check that the steps add up to the overall equation.

Catalysts in Rate Equations

A catalyst can appear in the rate equation if it’s involved in the rate-determining step, even though it isn’t used up overall. In the reaction between propanone and iodine, H⁺ is a catalyst and appears in the rate equation, while iodine reacts after the rate-determining step and has zero order.

The Arrhenius Equation

The Arrhenius equation shows how the rate constant depends on temperature and activation energy. It’s included on most A Level specifications, often in the second year.

k = Ae^(−Ea/RT)

  • k = rate constant
  • A = the Arrhenius constant (pre-exponential factor)
  • Ea = activation energy, in J mol⁻¹
  • R = gas constant, 8.31 J K⁻¹ mol⁻¹
  • T = temperature, in kelvin

What It Shows

  • Increasing temperature makes −Ea/RT less negative, so k increases.
  • A higher activation energy gives a smaller k, so a slower reaction.

The Logarithmic Form

Taking natural logs gives:

ln k = −Ea/R × (1/T) + ln A

This has the form y = mx + c. If you plot ln k on the y-axis against 1/T on the x-axis, you get a straight line with:

  • Gradient = −Ea/R
  • y-intercept = ln A

Worked Example 8: Finding Ea From a Graph

A graph of ln k against 1/T has a gradient of −10,000 K. Calculate the activation energy.

Gradient = −Ea/R
−10,000 = −Ea ÷ 8.31
Ea = 10,000 × 8.31 = 83,100 J mol⁻¹
Ea = 83.1 kJ mol⁻¹

Watch out: Use temperature in kelvin (°C + 273) and Ea in J mol⁻¹, not kJ mol⁻¹, in the equation. Convert to kJ mol⁻¹ only at the end.

The Most Common Rate Equation Mistakes

  • Using the coefficients from the balanced equation as orders. Orders must come from experimental data.
  • Comparing experiments where more than one concentration changes without accounting for both changes
  • Getting the units of k wrong, especially for third-order reactions
  • Saying k changes with concentration. It only changes with temperature (or a catalyst).
  • Confusing rate and k. Rate depends on concentration. k doesn’t.
  • Including species that react after the rate-determining step in the rate equation
  • Proposing mechanisms that don’t add up to the overall equation
  • Confusing graph types, such as a zero-order concentration–time line and a first-order rate–concentration line
  • Using °C instead of kelvin in the Arrhenius equation
  • Using kJ instead of J for Ea in the Arrhenius equation

Tips and Tricks for Rate Equations

Tip 1: Find the “Fair Comparison”

When working out orders, look for two experiments where only one concentration changes. Circle them before you start.

Tip 2: Use the Factor Rule

Ask: “By what factor did the concentration change, and by what factor did the rate change?”

  • Same factor → first order
  • Factor squared → second order
  • No change → zero order

Tip 3: Always Check k With a Second Experiment

After calculating k, use it to predict the rate for another experiment. If it matches, your rate equation is right.

Tip 4: Build the Units of k Step by Step

Rearrange for k, substitute units, and cancel. Don’t try to memorise units without understanding them.

Tip 5: “If It’s Not in the Rate Equation, It Comes Later”

A reactant that doesn’t appear in the rate equation reacts after the rate-determining step.

Practice Questions

Try these, then check the answers below.

  1. A reaction has the rate equation rate = k[X]²[Y]. What is the overall order?
  2. What are the units of k for the reaction in question 1?
  3. In a reaction, the concentration of P is tripled and the rate increases nine times. What is the order with respect to P?
  4. In a reaction, the concentration of Q is doubled and the rate stays the same. What is the order with respect to Q?
  5. A reaction has the rate equation rate = k[R]. When [R] = 0.050 mol dm⁻³, the rate is 2.5 × 10⁻⁴ mol dm⁻³ s⁻¹. Calculate k, including units.
  6. A reaction has a constant half-life of 20 s. What is its order, and what is k?
  7. The reaction 2A + B → C has the rate equation rate = k[A]². Which reactant reacts after the rate-determining step?
  8. What happens to the value of k if the temperature increases?

Answers

  1. 2 + 1 = third order overall
  2. dm⁶ mol⁻² s⁻¹
  3. Second order (3² = 9)
  4. Zero order
  5. k = rate ÷ [R] = (2.5 × 10⁻⁴) ÷ 0.050 = 5.0 × 10⁻³ s⁻¹
  6. First order (constant half-life). k = 0.693 ÷ 20 = 0.0347 s⁻¹
  7. B, because it doesn’t appear in the rate equation
  8. k increases, so the rate of reaction increases

How to Revise Rate Equations

  • Practise initial rates questions until finding the “fair comparison” becomes automatic.
  • Work out the units of k for zero, first, second and third order, using the rearranging method.
  • Sketch all six graphs (concentration–time and rate–concentration for zero, first and second order) from memory.
  • Link rate equations to mechanisms, using the examples in this guide.
  • Practise the Arrhenius equation, including plotting ln k against 1/T and finding Ea from the gradient.
  • Use spaced retrieval practice, returning to kinetics every week or two, because it links to equilibrium, energetics and organic mechanisms.

Rate Equations Revision Checklist

Before your exam, make sure you can:

  • Write a rate equation and define order, overall order and rate constant
  • Explain why orders must be found by experiment
  • Determine orders from initial rates data, including when two concentrations change
  • Calculate k and its units for any overall order
  • Use a rate equation to predict a rate
  • Identify the order from concentration–time and rate–concentration graphs
  • Find a rate by drawing a tangent to a concentration–time graph
  • Use half-life to identify a first-order reaction and calculate k
  • Describe continuous monitoring and clock reaction methods
  • Define the rate-determining step
  • Use a rate equation to deduce or check a mechanism
  • Use the Arrhenius equation, and find Ea from a graph of ln k against 1/T

A Level Chemistry Resources for Kinetics

Chemistry Toolkit has teacher-written A Level chemistry resources to help you master kinetics and every other topic:

  • Worksheets that build from orders of reaction to initial rates, graphs and mechanism questions, with full answers showing working
  • Knowledge organisers summarising rate equations, graph shapes and units of k on one page
  • Rapid Recall sets to keep definitions, units and graph shapes fresh
  • Misconception resources that catch common errors, such as using balanced equation coefficients as orders
  • Exam practice with topic tests and full mark schemes

Resources also cover International A Level chemistry. The Student plan costs £89.99 a year. Find out more for students.

Frequently Asked Questions

What is a rate equation?

A rate equation shows how the rate of a reaction depends on the concentrations of the reactants. It has the form rate = k[A]ᵐ[B]ⁿ, where m and n are the orders of reaction and k is the rate constant.

How do you determine the order of a reaction?

Compare experiments where only one concentration changes. If the rate doesn’t change, the order is zero. If the rate changes by the same factor as the concentration, it’s first order. If the rate changes by the square of the factor, it’s second order.

Can you work out the order from the balanced equation?

No. Orders of reaction must be found by experiment. The balanced equation shows the overall reaction, but not the mechanism, so the coefficients don’t tell you the orders.

What are the units of the rate constant?

The units depend on the overall order. Zero order: mol dm⁻³ s⁻¹. First order: s⁻¹. Second order: dm³ mol⁻¹ s⁻¹. Third order: dm⁶ mol⁻² s⁻¹.

What is the rate-determining step?

The rate-determining step is the slowest step in a reaction mechanism. It controls the overall rate. Species involved in this step, or in steps before it, appear in the rate equation.

Why doesn’t a reactant appear in the rate equation?

If a reactant doesn’t appear in the rate equation, it reacts after the rate-determining step, so changing its concentration doesn’t affect the rate. It has zero order.

Does the rate constant change with concentration?

No. The rate constant only changes with temperature, or when a catalyst is added. Changing concentration changes the rate, but not k.

How do you identify a first-order reaction from a graph?

On a concentration–time graph, a first-order reaction has a constant half-life. On a rate–concentration graph, a first-order reaction gives a straight line through the origin.

What is the Arrhenius equation?

The Arrhenius equation, k = Ae^(−Ea/RT), shows how the rate constant depends on temperature and activation energy. Plotting ln k against 1/T gives a straight line with a gradient of −Ea/R.

What is a clock reaction?

A clock reaction measures the time taken for a fixed amount of reaction to occur, often shown by a sudden colour change. The initial rate is proportional to 1 divided by the time.

Conclusion: Master Rate Equations With a Clear Method

Rate equations follow clear rules. Orders must come from experiment, the factor rule tells you the order from data, and the units of k come from rearranging the rate equation. The rate-determining step links the rate equation to the mechanism: anything not in the rate equation reacts later.

Practise initial rates questions, sketch the graphs from memory and link rate equations to mechanisms. With regular practice, kinetics becomes one of the most logical topics in A Level chemistry.

Chemistry Toolkit has A Level chemistry worksheets, knowledge organisers and recall questions to help you master kinetics and every other topic.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime