12 min read
How to Run a First Chemistry Tutoring Session (2026 Guide for Tutors)
Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers
On this page
- Why the First Chemistry Tutoring Session Matters
- Before the Session: How to Prepare
- Information to Gather From Parents or the Student
- Prepare Your Materials
- Plan for Online Sessions
- A 60-Minute First Chemistry Tutoring Session Plan
- 0 to 5 Minutes: Welcome and Icebreaker
- 5 to 15 Minutes: Goals and Background
- 15 to 35 Minutes: Diagnostic Questioning
- 35 to 45 Minutes: Observed Worksheet Practice
- 45 to 55 Minutes: A Quick Win
- 55 to 60 Minutes: Expectations and Next Steps
- How to Use Diagnostic Questions in a First Chemistry Tutoring Session
- What Makes a Good Diagnostic Question?
- Example Diagnostic Questions for Common Chemistry Misconceptions
- Ask About Confidence Too
- Ready-Made Diagnostic Resources
- How to Identify Knowledge Gaps After the First Session
- Use a Traffic-Light Specification Checklist
- Look for Root Causes
- Sort Gaps by Type
- How to Set Expectations in a First Chemistry Tutoring Session
- Agree With the Student
- Agree With Parents
- After the Session: Follow Up With Parents
- Example Parent Follow-Up Message
- Write a Learning Plan
- How to Adapt the First Session for Different Levels
- First GCSE Chemistry Tutoring Session
- First iGCSE Chemistry Tutoring Session
- First A Level Chemistry Tutoring Session
- First Online Chemistry Tutoring Session
- Common Mistakes in a First Chemistry Tutoring Session
- First Chemistry Tutoring Session Checklist
- Resources for Chemistry Tutors
- Frequently Asked Questions
- What should I do in a first chemistry tutoring session?
- How long should a first chemistry tutoring session be?
- Should I teach in the first chemistry tutoring session?
- How do I assess a new chemistry student’s level?
- What questions should I ask a new chemistry tutoring student?
- What are diagnostic questions in chemistry?
- How do I find a student’s chemistry misconceptions?
- What should I send to parents after a first tutoring session?
- How can I make an online chemistry tutoring session effective?
- Do I need a DBS check to tutor chemistry in the UK?
- Conclusion: Make Your First Chemistry Tutoring Session Count
Last updated: October 2026
A first chemistry tutoring session sets the tone for everything that follows. Get it right, and you’ll understand exactly what your student needs, build their confidence and give parents a clear reason to continue. Get it wrong, and you’ll spend weeks guessing at gaps you could have found in an hour.
This guide explains exactly what to do in a first chemistry tutoring session. It covers preparation before the session, icebreakers, diagnostic questioning, identifying knowledge gaps, setting expectations and following up with parents. It works for GCSE, iGCSE and A Level chemistry, both in person and online.
Quick answer: what to do in a first chemistry tutoring session
- Gather information from the parent or student before the session.
- Start with a short icebreaker to build rapport.
- Ask about the student’s goals, exam board, tier and exam dates.
- Use diagnostic questions to find knowledge gaps and misconceptions.
- Watch how the student works through a few questions.
- Teach one short, confidence-building concept.
- Agree expectations, homework and next steps.
- Send a short summary and learning plan to parents afterwards.
Why the First Chemistry Tutoring Session Matters
The first session is different from every session that follows. Its main job isn’t to teach, but to understand. You need to find out:
- What the student already knows
- Where their knowledge gaps are
- Which misconceptions they hold
- How confident they feel about chemistry
- How they learn best
- What the student and their parents want to achieve
A well-run first session also builds trust. Students who feel understood and capable in the first hour are far more likely to engage in later sessions. Parents who receive a clear plan are far more likely to book more sessions.
Before the Session: How to Prepare
Good preparation starts before you meet the student.
Information to Gather From Parents or the Student
Before the first chemistry tutoring session, ask for:
- Year group and qualification: KS3, GCSE, iGCSE, AS or A Level
- Exam board and specification: For example AQA, Edexcel, OCR, WJEC, Cambridge or OxfordAQA
- Separate Chemistry or Combined Science (for GCSE)
- Tier: Foundation or Higher at GCSE, or Core or Extended for Cambridge IGCSE
- Exam dates: Including mocks
- Current and target grades: From recent reports, tests or mocks
- Topics they find hardest: In the student’s own words
- Any learning needs or access arrangements: Such as extra time or a reader
- What they’re covering in school right now
Prepare Your Materials
- A diagnostic question set covering the student’s level and key foundation topics
- A short worksheet on a core topic, with answers
- The specification checklist for their exam board, so you can map gaps against it
- A periodic table and a calculator
- Note-taking space for observations during the session
Plan for Online Sessions
If you’re tutoring online, test your video platform, screen sharing and digital whiteboard before the session. Have resources ready to share as PDFs, and ask the student to have paper, a pen and a calculator ready.
A 60-Minute First Chemistry Tutoring Session Plan
Here’s a structure that works for most first sessions. Adjust timings to suit the student.
0 to 5 Minutes: Welcome and Icebreaker
Start by putting the student at ease. Many students feel nervous about tutoring, especially if they believe they’re “bad at chemistry”.
Chemistry icebreaker ideas:
- “What’s one thing in chemistry you actually enjoy, or used to enjoy?”
- “If you could get rid of one chemistry topic forever, which would it be?”
- “What’s the most interesting practical you’ve done in school?”
- “On a scale of 1 to 10, how confident do you feel about chemistry right now?”
These questions build rapport while giving you useful information about attitudes and confidence.
5 to 15 Minutes: Goals and Background
Ask open questions to understand the student’s situation and goals:
- “What grade are you aiming for?”
- “Which topics do you feel most and least confident about?”
- “What happens in chemistry lessons when you get stuck?”
- “How do you usually revise?”
- “What would make these sessions feel worthwhile to you?”
Listen carefully. A student’s answer to “how do you revise?” often explains their results. Many rely on re-reading notes, which is one of the least effective revision methods.
15 to 35 Minutes: Diagnostic Questioning
This is the most important part of the first session. Use diagnostic questions to find out what the student actually knows, not what they think they know.
Cover a range of foundation topics for their level, such as:
- Atomic structure and the periodic table
- Bonding and structure
- Formulae and balanced equations
- Moles and calculations
- Energy changes
- Rates of reaction
Ask the student to explain their thinking out loud as they answer. Their reasoning reveals far more than whether the answer is right or wrong.
35 to 45 Minutes: Observed Worksheet Practice
Give the student a few graded questions on one topic and watch how they work. Look for:
- How they approach unfamiliar questions
- Whether they show their working in calculations
- How they use scientific vocabulary
- Whether they check their answers
- How they react when they get stuck
45 to 55 Minutes: A Quick Win
Teach one short concept that addresses a gap you’ve just found, then let the student answer a question on it successfully. Ending with success builds confidence and shows the student, and their parent, that tutoring will work.
55 to 60 Minutes: Expectations and Next Steps
Summarise what you’ve found, agree the plan, and set a short piece of work for the next session.
How to Use Diagnostic Questions in a First Chemistry Tutoring Session
Improvised questioning often misses the most important gaps. A student may answer familiar questions correctly while holding serious misconceptions underneath. Well-designed diagnostic questions solve this problem.
What Makes a Good Diagnostic Question?
- It targets one key idea. You can see exactly what the student understands.
- The wrong answers are based on common misconceptions. If a student chooses one, you know precisely what they believe.
- It’s quick to answer. You can cover many topics in a short time.
- It reveals reasoning. Asking “why did you choose that?” shows how the student thinks.
Example Diagnostic Questions for Common Chemistry Misconceptions
Ionic bonding
What does sodium chloride contain?
A) Molecules of NaCl
B) Sodium ions and chloride ions in a giant lattice
C) Sodium atoms sharing electrons with chlorine atoms
Correct answer: B. Choosing A or C reveals a common misconception about ionic and covalent bonding.
Energy changes
When a chemical bond is broken, energy is:
A) Released
B) Taken in
C) Neither released nor taken in
Correct answer: B. Many students believe that breaking bonds releases energy.
Conservation of mass
Magnesium is heated in an open crucible and reacts with oxygen. How does the mass of the product compare with the mass of the magnesium?
A) Less
B) The same
C) More
Correct answer: C. The magnesium gains oxygen, so the product is heavier. Students often assume that burning always reduces mass.
Dissolving
When sugar dissolves in water, which statement is true?
A) The sugar melts
B) The sugar reacts with the water to make a new substance
C) The sugar particles spread out between the water particles
Correct answer: C. Confusing dissolving with melting or reacting is a common misconception.
Catalysts
What happens to a catalyst during a reaction?
A) It is used up
B) It is not used up and can be reused
C) It becomes part of the product
Correct answer: B. Many students think catalysts are consumed in reactions.
Ask About Confidence Too
After each answer, ask the student how confident they were, on a scale of 1 to 3. A wrong answer given with high confidence signals a deeply held misconception that needs careful attention. A right answer given with low confidence shows knowledge that needs reinforcing.
Ready-Made Diagnostic Resources
Writing good diagnostic questions takes time, and improvised questioning often misses the most revealing misconceptions. Ready-made diagnostic resources give you a consistent, reliable starting point for every new student.
Chemistry Toolkit’s misconception resources are designed for exactly this. The diagnostic questions make the classic wrong answer one of the options, so hidden errors show up straight away. Each misconception comes with notes on where it originates, often in something taught at KS3, so you can tackle the cause rather than the symptom. Follow-up re-tests then confirm whether the correction has stuck.
You can also ask a new student to complete the free three-minute chemistry diagnostic before the first session. It gives them a breakdown of the topics that need work, with no account needed.
How to Identify Knowledge Gaps After the First Session
After the session, turn your observations into a clear picture of the student’s needs.
Use a Traffic-Light Specification Checklist
Go through the student’s specification and rate each topic:
- Green: Secure. Answered confidently and correctly.
- Amber: Partly secure. Some errors or low confidence.
- Red: Gap or misconception. Needs teaching from the foundations.
Look for Root Causes
Many chemistry difficulties come from gaps in earlier topics. A student who struggles with moles may actually be struggling with:
- Relative formula mass
- Writing chemical formulae
- Balancing equations
- Rearranging equations in maths
Fix the root cause, and later topics become much easier.
Sort Gaps by Type
- Knowledge gaps: Content the student hasn’t learned or has forgotten
- Misconceptions: Incorrect ideas the student believes are right
- Skills gaps: Calculations, graph skills or practical skills
- Exam technique: Command words, structuring answers and timing
- Confidence: Students who know more than they believe
How to Set Expectations in a First Chemistry Tutoring Session
Clear expectations make tutoring more effective and avoid misunderstandings later.
Agree With the Student
- What you will cover in the first few sessions
- How much independent work to do between sessions
- What to bring to each session, such as class notes and recent tests
- How to ask for help with homework or school work
- That making mistakes in sessions is useful, not embarrassing
Agree With Parents
- The session schedule and length
- How progress will be shared, for example a short update after each session
- Your cancellation and payment policy
- Realistic goals and timescales
- How parents can support revision at home
After the Session: Follow Up With Parents
A short, professional follow-up message builds trust and shows parents the value of tutoring.
Example Parent Follow-Up Message
Hi [Parent’s name],
Thank you for booking [Student’s name]’s first chemistry session today. It was great to meet them.
Strengths: [Student] has a secure understanding of [topic] and worked well through the questions on [topic].
Areas to focus on: We identified gaps in [topic] and [topic], and a misconception about [topic], which we’ll work on first.
Plan for the next four sessions: [Topic 1], [Topic 2], [Topic 3], then a review and short topic test.
Before next session: [Student] will complete a short worksheet on [topic].
Please let me know if you have any questions.
Best wishes,
[Your name]
Write a Learning Plan
Use your diagnostic results to plan the next four to six sessions. Prioritise:
- Misconceptions that affect several topics
- Foundation gaps that later topics depend on
- Topics coming up soon in school or in exams
- Exam technique as the exam approaches
How to Adapt the First Session for Different Levels
First GCSE Chemistry Tutoring Session
Focus on foundations: atomic structure, bonding, formulae, equations and moles. Check whether the student takes separate Chemistry or Combined Science, and which tier they’re entered for.
First iGCSE Chemistry Tutoring Session
Confirm the exam board and syllabus carefully, as iGCSE structures differ between Cambridge, Edexcel and OxfordAQA. For Cambridge students, check whether they’re taking Core or Extended, and whether their practical component is the Practical Test or the Alternative to Practical paper.
First A Level Chemistry Tutoring Session
Check GCSE foundations first, especially moles, equations and bonding. Many A Level difficulties come from GCSE gaps. Assess maths skills too, including rearranging equations and using logarithms.
First Online Chemistry Tutoring Session
Use screen-shared diagnostic questions and a digital whiteboard. Ask the student to hold up written work to the camera, or photograph and send it. Keep the session interactive, because it’s easier for students to lose focus online.
Common Mistakes in a First Chemistry Tutoring Session
- Teaching too much too soon. The first session is for understanding the student.
- Relying only on improvised questions. These often miss key misconceptions.
- Talking more than the student. You learn most by listening and watching them work.
- Only asking about grades. Ask about confidence, revision habits and goals too.
- Ending without a plan. The student and parent should leave knowing what happens next.
- Not following up. A short summary message builds trust and shows professionalism.
First Chemistry Tutoring Session Checklist
Before the session:
- Exam board, specification, tier and exam dates confirmed
- Current and target grades known
- Diagnostic questions prepared
- Short worksheet with answers ready
- Specification checklist printed or saved
- Online platform tested, if tutoring online
During the session:
- Icebreaker and rapport building
- Goals and background discussed
- Diagnostic questions completed, with reasoning and confidence noted
- Observed worksheet practice
- One quick win taught
- Expectations and homework agreed
After the session:
- Traffic-light checklist completed
- Learning plan written
- Parent follow-up message sent
Resources for Chemistry Tutors
Chemistry Toolkit is a library of teacher-written chemistry resources built with tutors in mind. Alongside misconception diagnostics for a first session, it includes:
- Graded worksheets with full answer packs, so students can work and mark between sessions
- Rapid Recall sets of 15 spaced retrieval questions to open each session
- Knowledge organisers that summarise each topic on one page
- Exam practice with mock papers, topic tests and full mark schemes
Resources cover KS3, GCSE, iGCSE, AS Level and A Level chemistry, including international AS and A Level. The library works on a phone as well as a laptop, so you can find a resource between sessions.
The Tutor plan costs £129.99 a year with full library access and 100 downloads a month and priority email support. Find out more about Chemistry Toolkit for tutors.
Frequently Asked Questions
What should I do in a first chemistry tutoring session?
In a first chemistry tutoring session, build rapport, find out the student’s goals and exam details, use diagnostic questions to identify knowledge gaps and misconceptions, watch them work through a few questions, and agree a plan for future sessions.
How long should a first chemistry tutoring session be?
Most first chemistry tutoring sessions last 60 minutes. This gives enough time for rapport building, diagnostic questioning, observed practice and planning, without overwhelming the student.
Should I teach in the first chemistry tutoring session?
Yes, but only briefly. The main purpose is assessment, but teaching one short concept near the end gives the student a quick win and shows them, and their parent, that tutoring will help.
How do I assess a new chemistry student’s level?
Use diagnostic questions covering foundation topics for their level, ask them to explain their reasoning, and note their confidence in each answer. Combine this with recent school reports, test results and mock grades.
What questions should I ask a new chemistry tutoring student?
Ask about their target grade, exam board and tier, exam dates, favourite and least favourite topics, how they currently revise, and what happens when they get stuck in lessons.
What are diagnostic questions in chemistry?
Diagnostic questions are short questions designed to reveal exactly what a student understands. Their wrong answers are based on common misconceptions, so a student’s choice shows what they believe.
How do I find a student’s chemistry misconceptions?
Use diagnostic questions with misconception-based wrong answers, ask students to explain their reasoning out loud, and note any wrong answers given with high confidence.
What should I send to parents after a first tutoring session?
Send a short summary covering the student’s strengths, the main areas to focus on, a plan for the next few sessions and any work to complete before the next session.
How can I make an online chemistry tutoring session effective?
Test your technology beforehand, share diagnostic questions on screen, use a digital whiteboard for diagrams and calculations, and keep the session interactive with frequent questions.
Do I need a DBS check to tutor chemistry in the UK?
Private tutors in the UK aren’t legally required to have a DBS check, but many parents expect one, and tutoring agencies usually require it. Having a basic DBS check can help build trust with families.
Conclusion: Make Your First Chemistry Tutoring Session Count
A first chemistry tutoring session is your best opportunity to understand a student, build their confidence and set up a clear plan. Prepare well, listen more than you talk, use reliable diagnostic questions to find gaps and misconceptions, and finish with a quick win and clear next steps.
With the right structure and resources, every first session becomes the foundation for real progress.
Chemistry Toolkit gives tutors ready-made misconception diagnostics, worksheets with answer packs and recall questions for every chemistry topic.
Start your free Chemistry Toolkit trial today →
3 days. 10 free downloads. Cancel anytime.