Skip to content

← All articles

14 min read

How to Calculate Moles in GCSE Chemistry: Step-by-Step Guide (2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

Moles calculations are among the most feared topics in GCSE chemistry, and among the most important. They appear in almost every exam paper, they’re worth plenty of marks, and they’re the foundation for A Level chemistry.

The good news is that every moles calculation follows the same few steps. Once you know the formulas, can calculate relative formula mass and understand how to use ratios from balanced equations, you can answer any moles question with confidence.

This guide explains how to calculate moles in GCSE chemistry step by step. It covers the moles formula, relative formula mass, the Avogadro constant, reacting masses, limiting reactants, concentration, gas volumes and titrations, with worked examples, practice questions and tips to avoid common mistakes. It works for AQA, Edexcel, OCR and WJEC GCSE Chemistry and Combined Science.

Quick answer: how to calculate moles

moles = mass (g) ÷ relative formula mass (Mr)

For example, 88 g of carbon dioxide (Mr = 44) contains 88 ÷ 44 = 2 moles.

What Is a Mole in Chemistry?

A mole is a unit for measuring the amount of a substance. Just as a “dozen” always means 12, a mole always means the same number of particles.

One mole of any substance contains 6.02 × 10²³ particles.

This number is called the Avogadro constant. The particles might be atoms, molecules, ions or electrons, depending on the substance.

Why Do Chemists Use Moles?

Atoms and molecules are far too small to count individually. Moles let chemists link the mass of a substance, which can be measured, to the number of particles, which can’t. This makes it possible to work out exactly how much of each substance reacts or is produced.

The Key Idea

The mass of one mole of a substance, in grams, equals its relative formula mass (Mr).

  • One mole of carbon (Ar = 12) has a mass of 12 g.
  • One mole of water (Mr = 18) has a mass of 18 g.
  • One mole of carbon dioxide (Mr = 44) has a mass of 44 g.

Step 1: Calculate Relative Formula Mass (Mr)

Before you can calculate moles, you need the relative formula mass. Mr is the sum of the relative atomic masses (Ar) of all the atoms in the formula. Find the Ar values on the periodic table.

Common Relative Atomic Masses

  • H = 1
  • C = 12
  • N = 14
  • O = 16
  • Na = 23
  • Mg = 24
  • S = 32
  • Cl = 35.5
  • Ca = 40

Worked Examples

Water, H₂O:
(2 × 1) + 16 = 18

Carbon dioxide, CO₂:
12 + (2 × 16) = 44

Calcium carbonate, CaCO₃:
40 + 12 + (3 × 16) = 100

Magnesium chloride, MgCl₂:
24 + (2 × 35.5) = 95

Calcium hydroxide, Ca(OH)₂:
40 + 2 × (16 + 1) = 40 + 34 = 74

Ammonium sulfate, (NH₄)₂SO₄:
2 × (14 + 4 × 1) + 32 + (4 × 16) = 36 + 32 + 64 = 132

Brackets tip: Everything inside a bracket is multiplied by the number outside. In Ca(OH)₂, there are two oxygen atoms and two hydrogen atoms.

Step 2: Use the Moles Formula

The most important equation in GCSE moles calculations is:

moles = mass ÷ Mr

Or in symbols: n = m ÷ Mr

  • n = number of moles (mol)
  • m = mass (g)
  • Mr = relative formula mass (no units)

The Moles Formula Triangle

Many students remember this equation using a formula triangle:

  • Mass (m) goes at the top.
  • Moles (n) and Mr go at the bottom.

Cover the value you want to find:

  • To find moles: mass ÷ Mr
  • To find mass: moles × Mr
  • To find Mr: mass ÷ moles

Worked Example 1: Calculating Moles From Mass

How many moles are in 88 g of carbon dioxide?

  1. Mr of CO₂ = 44
  2. moles = mass ÷ Mr = 88 ÷ 44
  3. = 2 mol

Worked Example 2: Calculating Mass From Moles

What is the mass of 0.25 moles of sodium hydroxide, NaOH?

  1. Mr of NaOH = 23 + 16 + 1 = 40
  2. mass = moles × Mr = 0.25 × 40
  3. = 10 g

Worked Example 3: Calculating Mr From Mass and Moles

0.5 moles of a substance has a mass of 32 g. What is its Mr?

  1. Mr = mass ÷ moles = 32 ÷ 0.5
  2. = 64

Step 3: Moles and the Avogadro Constant

To find the number of particles in a sample, use:

number of particles = moles × 6.02 × 10²³

Worked Example 4: Calculating Number of Particles

How many molecules are in 0.5 moles of water?

number of molecules = 0.5 × 6.02 × 10²³ = 3.01 × 10²³ molecules

Watch Out: Molecules vs Atoms

One molecule of water, H₂O, contains 3 atoms. So one mole of water contains:

  • 6.02 × 10²³ molecules
  • 3 × 6.02 × 10²³ = 1.806 × 10²⁴ atoms

Always check whether a question asks for molecules, atoms or ions.

Step 4: Reacting Mass Calculations

Reacting mass calculations use a balanced equation to work out how much of a product forms, or how much reactant is needed.

The Three-Step Method

  1. Mass to moles: Convert the mass you’re given into moles, using moles = mass ÷ Mr.
  2. Use the ratio: Use the balanced equation to find the moles of the substance you want.
  3. Moles to mass: Convert back to mass, using mass = moles × Mr.

Memory trick: “Mass, moles, ratio, moles, mass.”

Worked Example 5: Burning Magnesium

What mass of magnesium oxide forms when 12 g of magnesium burns completely?

2Mg + O₂ → 2MgO

  1. Mass to moles: moles of Mg = 12 ÷ 24 = 0.5 mol
  2. Use the ratio: 2 mol Mg makes 2 mol MgO, a 1:1 ratio. So 0.5 mol Mg makes 0.5 mol MgO.
  3. Moles to mass: Mr of MgO = 24 + 16 = 40. Mass = 0.5 × 40 = 20 g

Worked Example 6: Thermal Decomposition of Calcium Carbonate

What mass of carbon dioxide forms when 50 g of calcium carbonate decomposes?

CaCO₃ → CaO + CO₂

  1. Mass to moles: moles of CaCO₃ = 50 ÷ 100 = 0.5 mol
  2. Use the ratio: 1 mol CaCO₃ makes 1 mol CO₂. So 0.5 mol CaCO₃ makes 0.5 mol CO₂.
  3. Moles to mass: mass = 0.5 × 44 = 22 g

Worked Example 7: A Reaction With a Different Ratio

What mass of ammonia forms from 6 g of hydrogen?

N₂ + 3H₂ → 2NH₃

  1. Mass to moles: Mr of H₂ = 2. Moles of H₂ = 6 ÷ 2 = 3 mol
  2. Use the ratio: 3 mol H₂ makes 2 mol NH₃. So 3 mol H₂ makes 2 mol NH₃.
  3. Moles to mass: Mr of NH₃ = 14 + 3 = 17. Mass = 2 × 17 = 34 g

Important: Use the ratio from the balanced equation to change moles. Don’t multiply the Mr by the big number in front of a formula.

Step 5: Balancing Equations Using Masses (Higher Tier)

You can use reacting masses to work out the balanced equation for a reaction.

The Method

  1. Convert each mass into moles.
  2. Divide all the mole values by the smallest one.
  3. Use the resulting whole-number ratio as the balancing numbers.

Worked Example 8

4.8 g of magnesium reacts with 3.2 g of oxygen to form 8.0 g of magnesium oxide. Work out the balanced equation.

  1. Convert to moles:
  • Mg: 4.8 ÷ 24 = 0.2 mol
  • O₂: 3.2 ÷ 32 = 0.1 mol
  • MgO: 8.0 ÷ 40 = 0.2 mol
  1. Divide by the smallest value (0.1):
  • Mg: 2
  • O₂: 1
  • MgO: 2
  1. Balanced equation: 2Mg + O₂ → 2MgO

Step 6: Limiting Reactants (Higher Tier)

In many reactions, one reactant runs out first. This is the limiting reactant. It limits the amount of product that can form. The other reactant is in excess.

How to Find the Limiting Reactant

  1. Calculate the moles of each reactant.
  2. Use the balanced equation to see how many moles of each are needed.
  3. The reactant that would run out first is the limiting reactant.
  4. Use the limiting reactant to calculate the amount of product.

Worked Example 9

2.4 g of magnesium reacts with 0.15 moles of hydrochloric acid. Which reactant is limiting, and what mass of hydrogen forms?

Mg + 2HCl → MgCl₂ + H₂

  1. Moles of Mg: 2.4 ÷ 24 = 0.1 mol
  2. HCl needed: The ratio is 1 Mg : 2 HCl, so 0.1 mol Mg needs 0.2 mol HCl. Only 0.15 mol HCl is available.
  3. HCl is the limiting reactant, and magnesium is in excess.
  4. Moles of H₂: The ratio is 2 HCl : 1 H₂, so 0.15 mol HCl makes 0.15 ÷ 2 = 0.075 mol H₂.
  5. Mass of H₂: 0.075 × 2 = 0.15 g

Step 7: Concentration Calculations

Concentration tells you how much solute is dissolved in a volume of solution. GCSE uses two units.

Concentration in g/dm³

concentration (g/dm³) = mass (g) ÷ volume (dm³)

Concentration in mol/dm³

concentration (mol/dm³) = moles ÷ volume (dm³)

Calculations using mol/dm³ are Higher tier content, and for some exam boards they’re only in separate GCSE Chemistry. Check your specification.

Converting Volume Units

Volumes must be in dm³. To convert from cm³ to dm³, divide by 1000.

  • 250 cm³ = 0.250 dm³
  • 25.0 cm³ = 0.0250 dm³

Worked Example 10: Moles From Concentration

How many moles of hydrochloric acid are in 25.0 cm³ of a 0.100 mol/dm³ solution?

  1. Convert the volume: 25.0 ÷ 1000 = 0.0250 dm³
  2. Calculate moles: moles = concentration × volume = 0.100 × 0.0250
  3. = 0.00250 mol

Worked Example 11: Converting Between mol/dm³ and g/dm³

What is the concentration in g/dm³ of a 0.100 mol/dm³ solution of sodium hydroxide?

concentration (g/dm³) = concentration (mol/dm³) × Mr = 0.100 × 40 = 4.00 g/dm³

Step 8: Gas Volume Calculations (Higher Tier)

At room temperature and pressure (RTP), one mole of any gas occupies 24 dm³, or 24,000 cm³.

moles of gas = volume (dm³) ÷ 24

volume of gas (dm³) = moles × 24

Gas volume calculations are Higher tier content, and for some exam boards they’re only in separate GCSE Chemistry.

Worked Example 12

What volume of carbon dioxide, at RTP, is produced when 0.5 moles of calcium carbonate decomposes?

CaCO₃ → CaO + CO₂

  1. Use the ratio: 1 mol CaCO₃ makes 1 mol CO₂, so 0.5 mol CO₂ forms.
  2. Calculate the volume: 0.5 × 24 = 12 dm³

Step 9: Titration Calculations (Higher Tier)

Titration calculations use concentration and the balanced equation to find an unknown concentration.

The Method

  1. Calculate the moles of the substance with the known concentration.
  2. Use the balanced equation to find the moles of the other substance.
  3. Calculate the unknown concentration, using concentration = moles ÷ volume (dm³).

Worked Example 13: A 1:1 Ratio

25.0 cm³ of sodium hydroxide solution is neutralised by 20.0 cm³ of 0.100 mol/dm³ hydrochloric acid. What is the concentration of the sodium hydroxide?

NaOH + HCl → NaCl + H₂O

  1. Moles of HCl: 0.100 × (20.0 ÷ 1000) = 0.00200 mol
  2. Use the ratio: 1:1, so moles of NaOH = 0.00200 mol
  3. Concentration of NaOH: 0.00200 ÷ (25.0 ÷ 1000) = 0.00200 ÷ 0.0250 = 0.0800 mol/dm³

Worked Example 14: A 2:1 Ratio

25.0 cm³ of sodium hydroxide solution is neutralised by 12.5 cm³ of 0.100 mol/dm³ sulfuric acid. What is the concentration of the sodium hydroxide?

2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O

  1. Moles of H₂SO₄: 0.100 × (12.5 ÷ 1000) = 0.00125 mol
  2. Use the ratio: 2 NaOH : 1 H₂SO₄, so moles of NaOH = 2 × 0.00125 = 0.00250 mol
  3. Concentration of NaOH: 0.00250 ÷ 0.0250 = 0.100 mol/dm³

Linked Calculations: Percentage Yield and Atom Economy

Moles calculations often lead into these related questions.

Percentage Yield

percentage yield = (actual mass of product ÷ theoretical mass of product) × 100

Example: In Worked Example 5, the theoretical mass of MgO was 20 g. If only 16 g forms, the percentage yield is (16 ÷ 20) × 100 = 80%.

Atom Economy

atom economy = (Mr of desired product ÷ total Mr of all reactants) × 100

Example: For CaCO₃ → CaO + CO₂, where CaO is the desired product:
(56 ÷ 100) × 100 = 56%

The Most Common Moles Calculation Mistakes

  • Calculating Mr incorrectly, especially with brackets, such as Ca(OH)₂
  • Multiplying Mr by the balancing number instead of using the mole ratio
  • Forgetting to convert cm³ to dm³ in concentration and titration calculations
  • Using the wrong ratio, or reading it the wrong way round
  • Rounding too early in multi-step calculations
  • Mixing up atoms and molecules in Avogadro constant questions
  • Missing units in the final answer
  • Using Cl = 35 instead of 35.5
  • Using an unbalanced equation

Tips and Tricks for Moles Calculations

Tip 1: Always Write the Formula First

Write the equation you’re using, such as moles = mass ÷ Mr, before substituting numbers. This earns method marks even if you make an arithmetic mistake.

Tip 2: Use “Mass, Moles, Ratio, Moles, Mass”

This sequence works for almost every reacting mass question. If you’re stuck, ask: “What can I convert into moles?”

Tip 3: Label Every Number

Write what each number represents, such as “moles of Mg = 0.5”. This keeps your working clear and helps you spot errors.

Tip 4: Check the Ratio Carefully

Find the numbers in front of the two substances you’re comparing in the balanced equation. Divide or multiply your moles to match.

Tip 5: Keep Full Values Until the End

Don’t round in the middle of a calculation. Use full calculator values, and round only your final answer.

Tip 6: Give Sensible Significant Figures

If the question doesn’t specify, give your answer to the same number of significant figures as the data in the question, usually 2 or 3.

Tip 7: Sense-Check Your Answer

Ask whether your answer is reasonable. For example, the mass of product should usually be similar in size to the masses of the reactants.

Practice Questions

Try these, then check the answers below.

  1. Calculate the Mr of sulfuric acid, H₂SO₄.
  2. How many moles are in 9 g of water?
  3. What is the mass of 2 moles of carbon dioxide?
  4. What mass of calcium oxide forms when 25 g of calcium carbonate decomposes? (CaCO₃ → CaO + CO₂)
  5. How many moles of sodium hydroxide are in 50.0 cm³ of a 0.200 mol/dm³ solution?
  6. What volume of oxygen, at RTP, is 0.25 moles?

Answers

  1. (2 × 1) + 32 + (4 × 16) = 98
  2. 9 ÷ 18 = 0.5 mol
  3. 2 × 44 = 88 g
  4. Moles of CaCO₃ = 25 ÷ 100 = 0.25 mol. Ratio 1:1, so 0.25 mol CaO. Mass = 0.25 × 56 = 14 g
  5. 0.200 × (50.0 ÷ 1000) = 0.0100 mol
  6. 0.25 × 24 = 6 dm³

How to Revise Moles Calculations

  • Practise little and often. A few moles questions every day work better than one long session.
  • Master Mr first. Most moles mistakes start with an incorrect Mr.
  • Learn the formulas by heart, using active recall rather than re-reading.
  • Work through graded questions, from simple moles calculations to multi-step reacting masses and titrations.
  • Use mark schemes to see how method marks are awarded.
  • Mix calculation types in each session, so you practise choosing the right method.
  • Revisit moles regularly with spaced retrieval practice, as it underpins much of GCSE and A Level chemistry.

Moles Calculations Revision Checklist

Before your exam, make sure you can:

  • Define a mole and state the Avogadro constant
  • Calculate Mr for any formula, including those with brackets
  • Use moles = mass ÷ Mr, rearranged for any value
  • Calculate numbers of particles using the Avogadro constant
  • Calculate reacting masses using balanced equations
  • Balance equations using reacting masses (Higher tier)
  • Identify limiting reactants (Higher tier)
  • Calculate concentrations in g/dm³ and mol/dm³, converting cm³ to dm³
  • Calculate gas volumes at RTP (Higher tier, where on your specification)
  • Carry out titration calculations (Higher tier, where on your specification)
  • Calculate percentage yield and atom economy

GCSE Chemistry Resources for Moles Calculations

Chemistry Toolkit has teacher-written GCSE chemistry resources to help you master moles and every other topic:

  • Worksheets that build from Mr calculations to multi-step reacting mass and titration questions, with full answers showing working
  • Knowledge organisers summarising every moles formula on one page
  • Rapid Recall sets with quick calculation practice to keep methods fresh
  • Misconception resources that catch common errors, such as multiplying Mr by balancing numbers
  • Exam practice with topic tests and full mark schemes

Resources also cover iGCSE chemistry. Not sure how secure your moles skills are? Take the free three-minute GCSE chemistry diagnostic. The Student plan costs £89.99 a year. Find out more for students.

Frequently Asked Questions

How do you calculate moles in GCSE chemistry?

Use the formula moles = mass ÷ Mr. First calculate the relative formula mass (Mr) by adding up the relative atomic masses of all the atoms in the formula, then divide the mass in grams by the Mr.

What is a mole in chemistry?

A mole is the amount of a substance that contains 6.02 × 10²³ particles. The mass of one mole of a substance, in grams, equals its relative formula mass.

What is the Avogadro constant?

The Avogadro constant is 6.02 × 10²³. It is the number of atoms, molecules or ions in one mole of a substance.

How do you calculate relative formula mass?

Add up the relative atomic masses (Ar) of all the atoms in the formula, using values from the periodic table. For example, the Mr of CO₂ is 12 + (2 × 16) = 44.

How do you calculate reacting masses?

Convert the mass you’re given into moles, use the ratio from the balanced equation to find the moles of the substance you want, then convert back to mass using mass = moles × Mr.

How do you convert cm³ to dm³?

Divide by 1000. For example, 25.0 cm³ = 0.0250 dm³.

What is a limiting reactant?

A limiting reactant is the reactant that is completely used up first in a reaction. It limits the amount of product that can form. The other reactant is in excess.

What volume does one mole of gas occupy?

At room temperature and pressure, one mole of any gas occupies 24 dm³, or 24,000 cm³.

Are moles calculations on the Foundation tier?

Many moles calculations are Higher tier content, but Foundation students still need to calculate relative formula mass and use concentration in g/dm³. Check your exam board’s specification for details.

Why are moles so important in chemistry?

Moles let chemists link the mass of a substance to the number of particles. They’re used to work out how much of each substance reacts or forms, and they underpin many GCSE and A Level chemistry topics.

Conclusion: Master Moles Calculations Step by Step

Moles calculations become much easier once you see the pattern. Calculate Mr carefully, use moles = mass ÷ Mr, follow “mass, moles, ratio, moles, mass” for reacting masses, and always convert cm³ to dm³ for concentration.

Practise little and often, show every step of your working, and you’ll turn one of the most feared GCSE chemistry topics into reliable marks.

Chemistry Toolkit has GCSE chemistry worksheets, knowledge organisers and recall questions to help you master moles and every other topic.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime