Skip to content

← All articles

14 min read

How to Calculate Kc: Equilibrium Constant Explained With Worked Examples (A Level Chemistry 2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

Calculating Kc is one of the most important skills in A Level chemistry equilibria. It appears in almost every exam series, usually as a multi-step calculation worth several marks. Students often lose marks not because the chemistry is hard, but because they use moles instead of concentrations, forget to apply powers, or get the units wrong.

This guide explains how to calculate Kc step by step. It covers what Kc is, how to write a Kc expression, how to work out its units, the ICE method for finding equilibrium amounts, and how to use Kc to find unknown concentrations. It also explains what does and doesn’t change the value of Kc, with fully worked examples, common mistakes and practice questions with answers.

Quick summary: calculating Kc in one minute

  • For aA + bB ⇌ cC + dD, the equilibrium constant is:
    Kc = [C]ᶜ[D]ᵈ ÷ ([A]ᵃ[B]ᵇ)
  • Use equilibrium concentrations in mol dm⁻³, not moles or starting amounts.
  • Products go on top, reactants on the bottom, each raised to the power of its coefficient.
  • Units depend on the equation. Work them out by substituting mol dm⁻³ and cancelling.
  • Only temperature changes Kc. Concentration, pressure and catalysts don’t.

What Is Kc?

Many reactions are reversible. In a closed system, a reversible reaction eventually reaches dynamic equilibrium, where:

  • The forward and reverse reactions happen at the same rate.
  • The concentrations of reactants and products stay constant.

Kc, the equilibrium constant in terms of concentration, describes the position of equilibrium at a particular temperature. It compares the concentrations of products with the concentrations of reactants at equilibrium.

What the Size of Kc Tells You

  • Kc much greater than 1: The equilibrium lies to the right. Products are favoured.
  • Kc much less than 1: The equilibrium lies to the left. Reactants are favoured.
  • Kc close to 1: Significant amounts of both reactants and products are present.

How to Write a Kc Expression

For the general reaction:

aA + bB ⇌ cC + dD

the Kc expression is:

Kc = [C]ᶜ[D]ᵈ ÷ ([A]ᵃ[B]ᵇ)

  • Square brackets [ ] mean “concentration of”, in mol dm⁻³.
  • Products go on the top.
  • Reactants go on the bottom.
  • Each concentration is raised to the power of its coefficient in the balanced equation.

Example Kc Expressions

N₂(g) + 3H₂(g) ⇌ 2NH₃(g)
Kc = [NH₃]² ÷ ([N₂][H₂]³)

2SO₂(g) + O₂(g) ⇌ 2SO₃(g)
Kc = [SO₃]² ÷ ([SO₂]²[O₂])

PCl₅(g) ⇌ PCl₃(g) + Cl₂(g)
Kc = [PCl₃][Cl₂] ÷ [PCl₅]

CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g)
Kc = [CO₂][H₂] ÷ ([CO][H₂O])

Important: Unlike rate equations, which must be found by experiment, Kc expressions always come directly from the balanced equation.

Heterogeneous Equilibria

At A Level, Kc questions usually involve homogeneous equilibria, where all substances are in the same phase. If your specification covers heterogeneous equilibria, solids (and sometimes pure liquids) are left out of the Kc expression, because their concentrations are effectively constant. Check your specification.

How to Work Out the Units of Kc

The units of Kc depend on the equation, so you need to work them out every time.

The Method

  1. Write the Kc expression.
  2. Replace every concentration with its units, mol dm⁻³.
  3. Cancel the units on the top and bottom.
  4. Write the remaining units, using negative powers if needed.

Worked Example: Units for the Haber Process

Kc = [NH₃]² ÷ ([N₂][H₂]³)

  • Top: (mol dm⁻³)²
  • Bottom: (mol dm⁻³) × (mol dm⁻³)³ = (mol dm⁻³)⁴
  • Units = (mol dm⁻³)² ÷ (mol dm⁻³)⁴ = (mol dm⁻³)⁻²
  • = mol⁻² dm⁶

Units for the Other Examples

  • 2SO₂ + O₂ ⇌ 2SO₃: (mol dm⁻³)² ÷ (mol dm⁻³)³ = (mol dm⁻³)⁻¹ = mol⁻¹ dm³
  • PCl₅ ⇌ PCl₃ + Cl₂: (mol dm⁻³)² ÷ (mol dm⁻³) = mol dm⁻³
  • CO + H₂O ⇌ CO₂ + H₂: (mol dm⁻³)² ÷ (mol dm⁻³)² = no units

Quick Shortcut

Count the total number of moles on each side of the equation:

  • Same number on each side: Kc has no units.
  • More moles on the bottom (reactants): Kc has units with mol⁻¹ dm³ to the power of the difference.
  • More moles on the top (products): Kc has units of mol dm⁻³ to the power of the difference.

Calculating Kc From Equilibrium Concentrations

The simplest type of question gives you the equilibrium concentrations directly.

Worked Example 1: The Contact Process

For 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), the equilibrium concentrations at a certain temperature are:

  • [SO₂] = 0.20 mol dm⁻³
  • [O₂] = 0.10 mol dm⁻³
  • [SO₃] = 0.60 mol dm⁻³

Calculate Kc, including units.

Step 1: Write the expression
Kc = [SO₃]² ÷ ([SO₂]²[O₂])

Step 2: Substitute
Kc = (0.60)² ÷ ((0.20)² × 0.10)
Kc = 0.36 ÷ (0.040 × 0.10)
Kc = 0.36 ÷ 0.0040

Step 3: Calculate
Kc = 90

Step 4: Units
mol⁻¹ dm³

Answer: Kc = 90 mol⁻¹ dm³

The ICE Method: Finding Equilibrium Amounts

Most exam questions don’t give you equilibrium concentrations directly. Instead, they give you starting amounts and one equilibrium amount. Use the ICE method to work out the rest.

ICE stands for:

  • Initial moles
  • Change in moles
  • Equilibrium moles

The ICE Method Step by Step

  1. Initial: Write the starting moles of each substance.
  2. Change: Use the equilibrium amount you’re given, and the ratio from the balanced equation, to work out how much of each substance reacts or forms.
  3. Equilibrium: Work out the equilibrium moles of each substance.
  4. Convert to concentrations: Divide each equilibrium amount by the volume in dm³.
  5. Substitute into the Kc expression and calculate.
  6. Work out the units.

Worked Example 2: A Decomposition Reaction

0.40 mol of PCl₅ is heated in a sealed 2.00 dm³ container:

PCl₅(g) ⇌ PCl₃(g) + Cl₂(g)

At equilibrium, there are 0.15 mol of Cl₂. Calculate Kc.

Initial moles:

  • PCl₅: 0.40
  • PCl₃: 0
  • Cl₂: 0

Change in moles:

  • Cl₂: +0.15
  • PCl₃: +0.15 (1:1 ratio with Cl₂)
  • PCl₅: −0.15 (1:1 ratio)

Equilibrium moles:

  • PCl₅: 0.40 − 0.15 = 0.25
  • PCl₃: 0.15
  • Cl₂: 0.15

Equilibrium concentrations (÷ 2.00 dm³):

  • [PCl₅] = 0.125 mol dm⁻³
  • [PCl₃] = 0.075 mol dm⁻³
  • [Cl₂] = 0.075 mol dm⁻³

Calculate Kc:

Kc = [PCl₃][Cl₂] ÷ [PCl₅]
Kc = (0.075 × 0.075) ÷ 0.125
Kc = 0.005625 ÷ 0.125
Kc = 0.045 mol dm⁻³

Worked Example 3: Using the Ratio From the Equation

1.00 mol of nitrogen and 3.00 mol of hydrogen are sealed in a 10.0 dm³ container and allowed to reach equilibrium:

N₂(g) + 3H₂(g) ⇌ 2NH₃(g)

At equilibrium, there are 0.40 mol of ammonia. Calculate Kc.

Initial moles:

  • N₂: 1.00
  • H₂: 3.00
  • NH₃: 0

Change in moles:

  • NH₃: +0.40
  • N₂: −0.20 (ratio N₂ : NH₃ = 1 : 2, so 0.40 ÷ 2)
  • H₂: −0.60 (ratio H₂ : NH₃ = 3 : 2, so 0.40 × 3 ÷ 2)

Equilibrium moles:

  • N₂: 1.00 − 0.20 = 0.80
  • H₂: 3.00 − 0.60 = 2.40
  • NH₃: 0.40

Equilibrium concentrations (÷ 10.0 dm³):

  • [N₂] = 0.080 mol dm⁻³
  • [H₂] = 0.240 mol dm⁻³
  • [NH₃] = 0.040 mol dm⁻³

Calculate Kc:

Kc = [NH₃]² ÷ ([N₂][H₂]³)
Kc = (0.040)² ÷ (0.080 × 0.240³)
Kc = 0.0016 ÷ (0.080 × 0.013824)
Kc = 0.0016 ÷ 0.00110592
Kc = 1.45 mol⁻² dm⁶

Watch out: The ratio from the balanced equation is the key step. Many students wrongly subtract 0.40 mol from every reactant.

When Does the Volume Matter?

In Worked Examples 2 and 3, you had to divide moles by volume, because the number of moles on each side of the equation was different.

If the total number of moles is the same on both sides, the volume cancels out, so you can use moles directly. For example, in CO + H₂O ⇌ CO₂ + H₂, there are two moles on each side, so the volume cancels.

Exam tip: Even when the volume cancels, show that you know why. Write “The volume cancels because there are equal moles on each side.” This can earn a mark.

Using Kc to Find an Unknown Concentration

If you know Kc and all but one of the equilibrium concentrations, rearrange the expression to find the missing value.

Worked Example 4: Finding an Unknown Concentration

For CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g), Kc = 4.0 at a certain temperature. At equilibrium:

  • [CO] = 0.10 mol dm⁻³
  • [H₂O] = 0.20 mol dm⁻³
  • [CO₂] = 0.40 mol dm⁻³

Calculate [H₂].

Step 1: Write the expression
Kc = [CO₂][H₂] ÷ ([CO][H₂O])

Step 2: Substitute
4.0 = (0.40 × [H₂]) ÷ (0.10 × 0.20)
4.0 = (0.40 × [H₂]) ÷ 0.020

Step 3: Rearrange
0.40 × [H₂] = 4.0 × 0.020 = 0.080
[H₂] = 0.080 ÷ 0.40

[H₂] = 0.20 mol dm⁻³

Finding Equilibrium Amounts From Kc

Harder questions give you Kc and the starting amounts, and ask you to find the equilibrium amounts. Use x for the unknown change.

Worked Example 5: Using x

1.00 mol of hydrogen and 1.00 mol of iodine are heated in a sealed container:

H₂(g) + I₂(g) ⇌ 2HI(g)

At this temperature, Kc = 64. Calculate the equilibrium amount of each substance.

Let x mol of H₂ react.

Equilibrium moles:

  • H₂: 1.00 − x
  • I₂: 1.00 − x
  • HI: 2x

The volume cancels, because there are equal moles on each side.

Write the expression:
64 = (2x)² ÷ ((1.00 − x)(1.00 − x)) = (2x)² ÷ (1.00 − x)²

Take the square root of both sides:
8 = 2x ÷ (1.00 − x)

Rearrange:
8(1.00 − x) = 2x
8 − 8x = 2x
8 = 10x
x = 0.80

Equilibrium amounts:

  • H₂: 1.00 − 0.80 = 0.20 mol
  • I₂: 0.20 mol
  • HI: 2 × 0.80 = 1.60 mol

Check: (1.60)² ÷ (0.20 × 0.20) = 2.56 ÷ 0.040 = 64 ✓

Tip: A Level questions are usually designed so the maths works out neatly, often with a perfect square like this one.

What Changes the Value of Kc?

Only Temperature Changes Kc

The value of Kc is constant at a given temperature. Changing the temperature changes Kc:

If the forward reaction is exothermic (ΔH negative):

  • Increasing temperature shifts the equilibrium to the left, so Kc decreases.
  • Decreasing temperature shifts the equilibrium to the right, so Kc increases.

If the forward reaction is endothermic (ΔH positive):

  • Increasing temperature shifts the equilibrium to the right, so Kc increases.
  • Decreasing temperature shifts the equilibrium to the left, so Kc decreases.

Concentration Doesn’t Change Kc

If you add more of a reactant, the ratio of products to reactants temporarily becomes smaller than Kc. The equilibrium shifts to the right, forming more product, until the ratio equals Kc again. The position of equilibrium changes, but Kc stays the same.

Pressure Doesn’t Change Kc

Changing the pressure can shift the position of equilibrium for gas reactions with different numbers of moles on each side. But the equilibrium shifts to restore the same ratio, so Kc stays the same.

Catalysts Don’t Change Kc

A catalyst speeds up the forward and reverse reactions equally. Equilibrium is reached faster, but the position of equilibrium and Kc don’t change.

Model Exam Answer

Question: The forward reaction for N₂ + 3H₂ ⇌ 2NH₃ is exothermic. State and explain the effect of increasing the temperature on the value of Kc. (2 marks)

Answer:

  • Kc decreases. (1)
  • The forward reaction is exothermic, so increasing the temperature shifts the equilibrium to the left, in the endothermic direction, reducing the concentration of ammonia relative to nitrogen and hydrogen. (1)

Extra: Kc for Reversed and Multiplied Equations

Some exam questions ask how Kc changes when an equation is written differently.

  • Reversing the equation: The new Kc is the reciprocal of the original: Kc(new) = 1 ÷ Kc. The units are also inverted.
  • Doubling the equation: The new Kc is the square of the original: Kc(new) = Kc².
  • Halving the equation: The new Kc is the square root of the original.

Example: For 2SO₂ + O₂ ⇌ 2SO₃, Kc = 90 mol⁻¹ dm³. For the reverse reaction, 2SO₃ ⇌ 2SO₂ + O₂:
Kc = 1 ÷ 90 = 0.0111 mol dm⁻³

Measuring Kc Experimentally

Some specifications include a practical to find Kc, often for an esterification reaction.

  1. Mix known amounts of a carboxylic acid and an alcohol, with a small amount of acid catalyst, in a sealed container.
  2. Leave the mixture for about a week to reach equilibrium at a constant temperature.
  3. Titrate a sample of the equilibrium mixture with standard sodium hydroxide solution to find the amount of acid present.
  4. Subtract the amount of acid catalyst, found by titrating the catalyst alone.
  5. Use the ICE method to find the equilibrium amounts of every substance, then calculate Kc.

The Most Common Kc Mistakes

  • Using moles instead of concentrations when the volume doesn’t cancel
  • Using initial amounts instead of equilibrium amounts
  • Forgetting to raise concentrations to the power of their coefficients
  • Putting reactants on top instead of products
  • Subtracting the same number of moles from every reactant, instead of using the ratio from the equation
  • Getting the units wrong, or adding units when they cancel
  • Forgetting to convert cm³ to dm³ before calculating concentrations
  • Saying Kc changes with concentration, pressure or a catalyst
  • Rounding too early in multi-step calculations

Tips and Tricks for Calculating Kc

Tip 1: Always Use the ICE Method

Even if a question looks simple, writing out initial, change and equilibrium amounts prevents mistakes.

Tip 2: Check the Ratio Twice

The change in moles must follow the ratio in the balanced equation. Check it before moving on.

Tip 3: Decide Whether the Volume Cancels

Count the moles on each side of the equation. If they’re equal, the volume cancels. If not, convert every amount to a concentration.

Tip 4: Work Out Units Separately

Calculate the number first, then work out the units in a separate line. This keeps your working clear.

Tip 5: Check Your Answer

Substitute your equilibrium values back into the Kc expression to check you get the same value.

Practice Questions

Try these, then check the answers below.

  1. Write the Kc expression and give the units for: 2NO₂(g) ⇌ N₂O₄(g)
  2. For the equilibrium in question 1, [NO₂] = 0.020 mol dm⁻³ and [N₂O₄] = 0.080 mol dm⁻³ at equilibrium. Calculate Kc.
  3. 2.00 mol of hydrogen iodide is heated in a sealed 1.00 dm³ container: 2HI(g) ⇌ H₂(g) + I₂(g). At equilibrium, there are 0.22 mol of H₂. Calculate Kc.
  4. The forward reaction of an equilibrium is exothermic. State the effect of increasing temperature on the value of Kc.
  5. For 2SO₂ + O₂ ⇌ 2SO₃, Kc = 90 mol⁻¹ dm³. A catalyst is added. State the effect on Kc.
  6. Explain why Kc for CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g) has no units.

Answers

  1. Kc = [N₂O₄] ÷ [NO₂]². Units: (mol dm⁻³) ÷ (mol dm⁻³)² = mol⁻¹ dm³
  2. Kc = 0.080 ÷ (0.020)² = 0.080 ÷ 0.00040 = 200 mol⁻¹ dm³
  3. Initial: HI 2.00, H₂ 0, I₂ 0. Change: H₂ +0.22, I₂ +0.22, HI −0.44. Equilibrium: HI 1.56, H₂ 0.22, I₂ 0.22. The volume is 1.00 dm³ (and cancels anyway). Kc = (0.22 × 0.22) ÷ (1.56)² = 0.0484 ÷ 2.4336 = 0.0199 (no units)
  4. Kc decreases.
  5. No effect. A catalyst doesn’t change Kc.
  6. There are two moles of gas on each side, so the concentration units on the top and bottom cancel out.

Calculating Kc Revision Checklist

Before your exam, make sure you can:

  • Describe dynamic equilibrium
  • Write a Kc expression from any balanced equation
  • Work out the units of Kc
  • Calculate Kc from equilibrium concentrations
  • Use the ICE method to find equilibrium amounts from starting amounts
  • Convert moles to concentrations using the volume
  • Explain when the volume cancels
  • Use Kc to find an unknown equilibrium concentration
  • Use x to find equilibrium amounts when Kc is given
  • Explain how temperature affects Kc for exothermic and endothermic reactions
  • Explain why concentration, pressure and catalysts don’t change Kc
  • Describe how Kc can be found by experiment

A Level Chemistry Resources for Equilibria

Chemistry Toolkit has teacher-written resources for AS Level and A Level chemistry to help you master equilibria and every other topic:

  • Worksheets that build from writing Kc expressions to multi-step ICE calculations, with full answers showing working
  • Knowledge organisers summarising Kc expressions, units and Le Chatelier’s principle on one page
  • Rapid Recall sets to keep equilibrium definitions and methods fresh
  • Misconception resources that catch common errors, such as thinking pressure changes Kc
  • Exam practice with topic tests and full mark schemes

Resources also cover International AS Level and International A Level chemistry. See the pricing page for plan details.

  • Rate equations and the rate-determining step
  • Hess’s law, Hess cycles and enthalpy calculations
  • A Level chemistry exam questions by topic
  • A Level Chemistry Paper 1 practice questions and answers

Frequently Asked Questions

How do you calculate Kc?

Write the Kc expression from the balanced equation, with products on top and reactants on the bottom, each raised to the power of its coefficient. Substitute the equilibrium concentrations in mol dm⁻³, then calculate and work out the units.

What is the formula for Kc?

For aA + bB ⇌ cC + dD, Kc = [C]ᶜ[D]ᵈ ÷ ([A]ᵃ[B]ᵇ), where the square brackets show equilibrium concentrations in mol dm⁻³.

How do you work out the units of Kc?

Replace each concentration in the Kc expression with mol dm⁻³, then cancel the units on the top and bottom. If there are equal moles on each side of the equation, Kc has no units.

What is the ICE method?

ICE stands for initial, change and equilibrium. It’s a way of organising moles to find equilibrium amounts from starting amounts, using the ratio from the balanced equation.

Do you use moles or concentrations in Kc?

Kc uses equilibrium concentrations in mol dm⁻³. You can only use moles directly if the volume cancels, which happens when there are equal moles on each side of the equation.

What affects the value of Kc?

Only temperature affects the value of Kc. Changing concentration or pressure can shift the position of equilibrium, but Kc stays the same. Catalysts don’t change Kc.

How does temperature affect Kc?

For an exothermic forward reaction, increasing temperature decreases Kc. For an endothermic forward reaction, increasing temperature increases Kc.

What does a large value of Kc mean?

A large value of Kc means the equilibrium lies to the right, so products are favoured at equilibrium.

Does a catalyst change Kc?

No. A catalyst increases the rates of the forward and reverse reactions equally, so equilibrium is reached faster, but Kc doesn’t change.

What is Kc for a reversed equation?

The Kc for a reversed equation is the reciprocal of the original Kc: 1 ÷ Kc. The units are inverted too.

Conclusion: Calculate Kc With Confidence

Calculating Kc follows a clear method. Write the expression from the balanced equation, use the ICE method to find equilibrium amounts, convert to concentrations if the volume doesn’t cancel, substitute, and work out the units. Remember that only temperature changes the value of Kc.

Practise with different types of question, from simple substitution to ICE calculations and finding unknowns, and Kc will become one of the most reliable topics in your A Level chemistry exams.

Chemistry Toolkit has A Level chemistry worksheets, knowledge organisers and recall questions to help you master equilibria and every other topic.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime