Skip to content

← All articles

13 min read

GCSE Electrolysis Explained: Molten vs Aqueous (2026 Revision Guide)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

Electrolysis is one of the most commonly examined GCSE chemistry topics, and one of the most confusing. Students often learn what happens with molten compounds, then lose marks on aqueous solutions, where water changes the products.

The key to electrolysis is understanding one difference: in a molten compound there are only two types of ion, but in an aqueous solution there are four. Once you know the two simple rules for aqueous solutions, you can predict the products of any electrolysis question.

This guide explains GCSE electrolysis step by step: what it is, how molten and aqueous electrolysis differ, how to predict products at each electrode, how to write half equations, and how electrolysis is used to extract aluminium and purify copper. It includes worked examples, practice questions, model exam answers and common mistakes. It works for AQA, Edexcel, OCR and WJEC GCSE Chemistry and Combined Science.

Quick summary: molten vs aqueous electrolysis

  • Molten compound: The metal forms at the cathode, and the non-metal forms at the anode.
  • Aqueous solution, at the cathode: The metal forms if it’s less reactive than hydrogen. Otherwise, hydrogen forms.
  • Aqueous solution, at the anode: Oxygen forms, unless the solution contains halide ions. Then the halogen forms.

What Is Electrolysis?

Electrolysis is the process of using electricity to break down an ionic compound into its elements.

Key Words You Must Know

  • Electrolyte: The molten or dissolved ionic compound that conducts electricity and is broken down.
  • Electrodes: The conducting rods that carry the current into the electrolyte.
  • Cathode: The negative electrode.
  • Anode: The positive electrode.
  • Cations: Positive ions. They move to the cathode.
  • Anions: Negative ions. They move to the anode.
  • Inert electrodes: Electrodes that don’t react during electrolysis, such as graphite or platinum.

Memory Trick: PANIC

Positive Anode, Negative Is Cathode.

Why Must the Ionic Compound Be Molten or Dissolved?

In a solid ionic compound, the ions are held in fixed positions in a lattice, so they can’t move. For electrolysis to work, the ions must be free to move to the electrodes. This happens when the compound is melted or dissolved in water.

What Happens at Each Electrode?

At the Cathode (Negative Electrode)

  • Positive ions are attracted to the cathode.
  • They gain electrons.
  • Gaining electrons is reduction.

At the Anode (Positive Electrode)

  • Negative ions are attracted to the anode.
  • They lose electrons.
  • Losing electrons is oxidation.

Memory Trick: OIL RIG

Oxidation Is Loss of electrons, Reduction Is Gain of electrons.

Electrolysis of Molten Compounds

Molten electrolysis is the simpler case. The molten compound contains only two types of ion: the metal ion and the non-metal ion.

The Rule for Molten Compounds

  • At the cathode: The metal is produced.
  • At the anode: The non-metal is produced.

Worked Example 1: Molten Lead Bromide, PbBr₂

Ions present: Pb²⁺ and Br⁻

At the cathode: Lead ions gain electrons to form lead.
Pb²⁺ + 2e⁻ → Pb

At the anode: Bromide ions lose electrons to form bromine.
2Br⁻ → Br₂ + 2e⁻

Observations: Molten lead collects at the bottom near the cathode. A brown vapour of bromine forms at the anode.

Safety: This experiment is usually demonstrated in a fume cupboard, because bromine vapour and lead compounds are toxic.

Worked Example 2: Molten Sodium Chloride, NaCl

Ions present: Na⁺ and Cl⁻

At the cathode: Na⁺ + e⁻ → Na
At the anode: 2Cl⁻ → Cl₂ + 2e⁻

Products: Sodium metal and chlorine gas.

Electrolysis of Aqueous Solutions

This is where most students lose marks. When an ionic compound is dissolved in water, the solution contains four types of ion:

  • The ions from the compound
  • Hydrogen ions (H⁺) and hydroxide ions (OH⁻), from the water

Water is very slightly ionised, so it always provides a small number of H⁺ and OH⁻ ions.

At each electrode, two types of ion compete, and only one is discharged. Two simple rules tell you which one.

Rule 1: At the Cathode (Negative Electrode)

The metal is produced if it is less reactive than hydrogen. Otherwise, hydrogen is produced.

  • Copper, silver and gold are less reactive than hydrogen, so the metal forms.
  • Potassium, sodium, lithium, calcium, magnesium, aluminium, zinc and iron are more reactive than hydrogen, so hydrogen forms.

Exam favourite: In aqueous sodium chloride, sodium is not produced at the cathode. Hydrogen gas is produced instead.

Rule 2: At the Anode (Positive Electrode)

Oxygen is produced, unless the solution contains halide ions. Then the halogen is produced.

  • Chloride (Cl⁻) → chlorine
  • Bromide (Br⁻) → bromine
  • Iodide (I⁻) → iodine
  • Sulfate (SO₄²⁻), nitrate (NO₃⁻) or carbonate (CO₃²⁻) → oxygen

Memory Tricks for the Two Rules

  • Cathode: “Is the metal below hydrogen? Then you get the metal. If not, you get hydrogen.”
  • Anode: “Halide? Halogen. No halide? Oxygen.”

Products of Electrolysis of Common Aqueous Solutions

Use these examples to check that you can apply the rules. All use inert electrodes.

Sodium Chloride Solution, NaCl(aq)

  • At the cathode: Hydrogen (sodium is more reactive than hydrogen)
  • At the anode: Chlorine (chloride ions are present)
  • Left in solution: Sodium hydroxide

Copper(II) Sulfate Solution, CuSO₄(aq)

  • At the cathode: Copper (copper is less reactive than hydrogen)
  • At the anode: Oxygen (sulfate isn’t a halide)
  • Left in solution: Sulfuric acid. The blue colour fades as copper ions are removed.

Copper(II) Chloride Solution, CuCl₂(aq)

  • At the cathode: Copper
  • At the anode: Chlorine

Potassium Bromide Solution, KBr(aq)

  • At the cathode: Hydrogen
  • At the anode: Bromine

Sodium Sulfate Solution, Na₂SO₄(aq)

  • At the cathode: Hydrogen
  • At the anode: Oxygen
  • Note: The water is effectively broken down. The volume of hydrogen produced is twice the volume of oxygen.

Dilute Sulfuric Acid, H₂SO₄(aq)

  • At the cathode: Hydrogen
  • At the anode: Oxygen

Potassium Nitrate Solution, KNO₃(aq)

  • At the cathode: Hydrogen
  • At the anode: Oxygen

Molten vs Aqueous Electrolysis: Side-by-Side Example

Comparing sodium chloride in both states shows the difference clearly.

Molten Sodium Chloride

  • Ions present: Na⁺ and Cl⁻
  • At the cathode: Sodium
  • At the anode: Chlorine

Aqueous Sodium Chloride

  • Ions present: Na⁺, Cl⁻, H⁺ and OH⁻
  • At the cathode: Hydrogen, because sodium is more reactive than hydrogen
  • At the anode: Chlorine, because chloride ions are present
  • Left in solution: Sodium hydroxide

Half Equations for Electrolysis (Higher Tier)

Half equations show what happens at each electrode, including the electrons.

How to Write Half Equations

  1. Write the ion and the product.
  2. Balance the atoms.
  3. Add electrons to balance the charges.
  4. Cathode: Electrons go on the left, because ions gain electrons.
  5. Anode: Electrons go on the right, because ions lose electrons. (Some exam boards also accept writing “− 2e⁻” on the left.)

Common Half Equations

At the cathode:

  • Copper: Cu²⁺ + 2e⁻ → Cu
  • Hydrogen: 2H⁺ + 2e⁻ → H₂
  • Sodium (molten only): Na⁺ + e⁻ → Na
  • Lead (molten only): Pb²⁺ + 2e⁻ → Pb
  • Aluminium: Al³⁺ + 3e⁻ → Al

At the anode:

  • Chlorine: 2Cl⁻ → Cl₂ + 2e⁻
  • Bromine: 2Br⁻ → Br₂ + 2e⁻
  • Oxygen from hydroxide ions: 4OH⁻ → O₂ + 2H₂O + 4e⁻
  • Oxygen from oxide ions (molten aluminium oxide): 2O²⁻ → O₂ + 4e⁻

Exam tip: Some exam boards write the oxygen half equation differently, as 2H₂O → O₂ + 4H⁺ + 4e⁻. Learn the version your exam board uses.

Checking a Half Equation

The charges must balance on both sides. For example:

2Cl⁻ → Cl₂ + 2e⁻

  • Left side: 2 × (−1) = −2
  • Right side: 0 + 2 × (−1) = −2

Both sides balance.

Extracting Aluminium by Electrolysis

Aluminium is more reactive than carbon, so it can’t be extracted by reduction with carbon. Instead, it’s extracted from aluminium oxide by electrolysis.

The Process

  • Electrolyte: Aluminium oxide, Al₂O₃, dissolved in molten cryolite
  • Electrodes: Graphite (carbon)

Why Cryolite Is Used

Aluminium oxide has a very high melting point. Dissolving it in molten cryolite lowers the temperature needed, which saves energy and reduces costs.

Reactions at the Electrodes

At the cathode: Aluminium ions gain electrons to form aluminium.
Al³⁺ + 3e⁻ → Al

At the anode: Oxide ions lose electrons to form oxygen.
2O²⁻ → O₂ + 4e⁻

Why the Anodes Must Be Replaced

The oxygen produced at the anode reacts with the hot carbon anodes, forming carbon dioxide. The anodes gradually burn away, so they must be replaced regularly.

Why Aluminium Extraction Is Expensive

  • Melting the electrolyte requires a lot of energy.
  • Large amounts of electricity are needed to produce the current.
  • The carbon anodes must be replaced regularly.

Purifying Copper by Electrolysis

This application is included on some GCSE specifications.

The Set-Up

  • Anode: Impure copper
  • Cathode: Pure copper
  • Electrolyte: Copper sulfate solution

What Happens

At the anode: Copper atoms lose electrons and enter the solution as copper ions. The anode gets smaller.
Cu → Cu²⁺ + 2e⁻

At the cathode: Copper ions gain electrons and form pure copper. The cathode gets bigger.
Cu²⁺ + 2e⁻ → Cu

Impurities fall to the bottom of the cell as a sludge.

Key difference: Here the copper anode is not inert. It takes part in the reaction, which is why oxygen isn’t produced.

Testing the Products of Electrolysis

Learn these tests and their observations:

  • Hydrogen: A lit splint gives a squeaky pop.
  • Oxygen: A glowing splint relights.
  • Chlorine: Damp litmus paper is bleached white.

Exam tip: Always give the observation, not just the test. “Use a glowing splint” doesn’t earn the mark. “The glowing splint relights” does.

The Electrolysis Required Practical

Many exam boards include a required or core practical on the electrolysis of aqueous solutions using inert electrodes.

Typical Method

  1. Pour the aqueous solution into a beaker or electrolysis cell.
  2. Place two inert electrodes, such as graphite rods, into the solution, making sure they don’t touch.
  3. Connect the electrodes to a low-voltage DC power supply.
  4. Turn on the power supply and observe what happens at each electrode.
  5. Collect any gases in test tubes, and test them to identify them.
  6. Record your observations, then repeat with different solutions.

Safety

  • Use a low voltage.
  • Work in a well-ventilated room, as chlorine is toxic.
  • Wear eye protection.

Model Exam Answers

Question 1: Explain why hydrogen, not sodium, is produced at the cathode during the electrolysis of sodium chloride solution. (2 marks)

Model answer:

Sodium is more reactive than hydrogen. So hydrogen ions are discharged at the cathode, gaining electrons to form hydrogen gas, instead of sodium ions.

Question 2: Explain why solid sodium chloride can’t be electrolysed. (2 marks)

Model answer:

In solid sodium chloride, the ions are held in fixed positions in a lattice. They can’t move to the electrodes, so the solid doesn’t conduct electricity.

Question 3: Predict the products at each electrode when copper chloride solution is electrolysed, and explain your answer. (4 marks)

Model answer:

Copper is produced at the cathode, because copper is less reactive than hydrogen. Chlorine is produced at the anode, because the solution contains chloride ions, which are halide ions.

Question 4: Explain why the electrolysis of aluminium oxide uses molten cryolite. (2 marks)

Model answer:

Aluminium oxide has a very high melting point. Dissolving it in molten cryolite lowers the temperature needed, which reduces the energy required and lowers costs.

The Most Common Electrolysis Mistakes

  • Mixing up the anode and cathode. Remember PANIC.
  • Forgetting the H⁺ and OH⁻ ions from water in aqueous solutions
  • Saying sodium forms at the cathode in aqueous sodium chloride
  • Saying sulfate or nitrate ions are discharged. Oxygen forms instead.
  • Mixing up oxidation and reduction. Remember OIL RIG.
  • Putting electrons on the wrong side of half equations
  • Writing Cl instead of Cl₂, or Br instead of Br₂. Halogens are diatomic.
  • Unbalanced half equations, where the charges don’t match
  • Saying the ions are “free to move” in a solid
  • Giving a test without the observation

Tips and Tricks for GCSE Electrolysis

Tip 1: List the Ions First

For every aqueous solution, write all four ions before predicting anything. For copper sulfate: Cu²⁺, SO₄²⁻, H⁺ and OH⁻.

Tip 2: Apply One Rule at a Time

Deal with the cathode first using Rule 1, then the anode using Rule 2. Don’t try to do both at once.

Tip 3: Learn Which Metals Are Below Hydrogen

At GCSE, the metals less reactive than hydrogen are mainly copper, silver and gold. If the metal isn’t one of these, hydrogen usually forms in aqueous solutions.

Tip 4: Think About What’s Left in Solution

The ions that aren’t discharged stay in solution. In sodium chloride solution, Na⁺ and OH⁻ remain, forming sodium hydroxide.

Tip 5: Balance Charge, Not Just Atoms

When writing half equations, add electrons until the total charge is the same on both sides.

Practice Questions

Try these, then check the answers below.

  1. Name the electrode where positive ions are attracted.
  2. What is produced at the anode when molten potassium iodide is electrolysed?
  3. Predict the products at each electrode when silver nitrate solution is electrolysed using inert electrodes.
  4. Predict the products at each electrode when magnesium bromide solution is electrolysed.
  5. Write the half equation for the formation of copper at the cathode.
  6. Is the reaction at the cathode oxidation or reduction? Explain.

Answers

  1. The cathode (negative electrode)
  2. Iodine
  3. Cathode: Silver, because silver is less reactive than hydrogen. Anode: Oxygen, because nitrate isn’t a halide.
  4. Cathode: Hydrogen, because magnesium is more reactive than hydrogen. Anode: Bromine, because bromide ions are present.
  5. Cu²⁺ + 2e⁻ → Cu
  6. Reduction, because positive ions gain electrons at the cathode.

How to Revise GCSE Electrolysis

  • Learn the two aqueous rules by heart, using active recall.
  • Practise predicting products for many different solutions, not just the examples you’ve seen.
  • Write half equations from memory, and check the charges balance.
  • Draw and label electrolysis diagrams, including the electrodes, electrolyte and power supply.
  • Learn the required practical method and safety precautions.
  • Revisit the topic regularly with spaced retrieval practice, mixing molten and aqueous questions.

GCSE Electrolysis Revision Checklist

Before your exam, make sure you can:

  • Define electrolysis, electrolyte, anode and cathode
  • Explain why ionic compounds must be molten or dissolved
  • Predict the products of electrolysing molten compounds
  • List the four ions in an aqueous solution
  • Apply the two rules to predict products for aqueous solutions
  • Explain why hydrogen, not a reactive metal, forms at the cathode
  • Explain why oxygen, not sulfate or nitrate, forms at the anode
  • Identify oxidation and reduction at each electrode
  • Write and balance half equations (Higher tier)
  • Describe the extraction of aluminium and explain the use of cryolite
  • Describe copper purification, if it’s on your specification
  • Describe tests for hydrogen, oxygen and chlorine
  • Describe the electrolysis required practical

GCSE Chemistry Resources for Electrolysis

Chemistry Toolkit has teacher-written GCSE chemistry resources to help you master electrolysis and every other topic:

  • Worksheets that build from basic definitions to predicting products and writing half equations, with full answers
  • Knowledge organisers summarising the electrolysis rules, half equations and applications on one page
  • Rapid Recall sets to keep the rules and tests fresh
  • Misconception resources that catch common errors, such as confusing which ions move to which electrode
  • Exam practice with topic tests and full mark schemes

Resources also cover iGCSE chemistry. The Student plan costs £89.99 a year. Find out more for students.

Frequently Asked Questions

What is the difference between molten and aqueous electrolysis?

A molten ionic compound contains only two types of ion, so the metal forms at the cathode and the non-metal forms at the anode. An aqueous solution also contains H⁺ and OH⁻ ions from water, so hydrogen or oxygen may form instead.

What is produced at the cathode in aqueous electrolysis?

The metal is produced if it is less reactive than hydrogen, such as copper or silver. Otherwise, hydrogen gas is produced.

What is produced at the anode in aqueous electrolysis?

Oxygen is produced, unless the solution contains halide ions, such as chloride, bromide or iodide. Then the halogen is produced.

Why is hydrogen produced instead of sodium in sodium chloride solution?

Sodium is more reactive than hydrogen. So hydrogen ions from the water are discharged at the cathode, forming hydrogen gas, instead of sodium ions.

Why must ionic compounds be molten or dissolved for electrolysis?

In a solid, the ions are held in fixed positions in a lattice and can’t move. When the compound is molten or dissolved, the ions are free to move to the electrodes.

Is the cathode positive or negative?

The cathode is the negative electrode, and the anode is the positive electrode. Remember PANIC: Positive Anode, Negative Is Cathode.

Is oxidation or reduction at the anode?

Oxidation happens at the anode, because negative ions lose electrons there. Reduction happens at the cathode, because positive ions gain electrons.

Why is cryolite used in aluminium extraction?

Aluminium oxide has a very high melting point. Dissolving it in molten cryolite lowers the temperature needed, which saves energy and reduces costs.

Why do the anodes need replacing in aluminium extraction?

The oxygen produced at the anode reacts with the hot carbon anodes to form carbon dioxide, so the anodes gradually burn away.

What is left in solution after electrolysing sodium chloride solution?

Sodium hydroxide is left in solution, because sodium ions and hydroxide ions aren’t discharged.

Conclusion: Master GCSE Electrolysis With Two Simple Rules

Electrolysis becomes much simpler once you see the difference between molten and aqueous electrolytes. Molten compounds contain only two ions, so the products are always the metal and the non-metal. Aqueous solutions contain four ions, so use the two rules: metal or hydrogen at the cathode, and halogen or oxygen at the anode.

Learn the rules, practise predicting products for many different solutions, and write half equations until they become automatic. With regular practice, electrolysis becomes one of the most reliable topics on your GCSE chemistry paper.

Chemistry Toolkit has GCSE chemistry worksheets, knowledge organisers and recall questions to help you master electrolysis and every other topic.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime