Skip to content

← All articles

15 min read

Born–Haber Cycles Explained: A Level Chemistry Revision Guide (2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

Born–Haber cycles are one of the most feared topics in A Level chemistry. They combine definitions, diagrams and calculations, and a single sign error can cost every mark in a question. But once you understand the logic behind them, Born–Haber cycles become some of the most predictable marks on the paper.

This guide explains Born–Haber cycles step by step: what they are, every enthalpy definition you need, how to draw a Born–Haber cycle, and how to calculate lattice enthalpy, with fully worked examples for NaCl and MgCl₂. You’ll also find tips and tricks to avoid common mistakes, a practice question with answers and an exam-ready checklist.

Quick summary: Born–Haber cycles in one minute

  • A Born–Haber cycle is an energy cycle for forming an ionic compound from its elements.
  • It is based on Hess’s law: the total enthalpy change is the same whichever route you take.
  • It is mainly used to calculate lattice enthalpy, which can’t be measured directly.
  • Endothermic steps go up the diagram. Exothermic steps go down.
  • The key equation: enthalpy of formation = sum of all the other steps, including lattice enthalpy.

What Is a Born–Haber Cycle?

A Born–Haber cycle is a type of Hess’s law cycle that shows all the enthalpy changes involved in forming an ionic compound from its elements.

It compares two routes:

  • The direct route: Elements in their standard states form the ionic compound in one step. This is the enthalpy of formation.
  • The indirect route: The elements are turned into gaseous atoms, then into gaseous ions, and the gaseous ions come together to form the ionic lattice.

Because of Hess’s law, both routes have the same total enthalpy change. That means if you know every value except one, you can calculate the missing one. In A Level chemistry, the missing value is usually the lattice enthalpy.

Why Can’t We Measure Lattice Enthalpy Directly?

Lattice enthalpy involves forming a solid lattice from separate gaseous ions, or breaking a lattice into gaseous ions. It’s impossible to carry this out and measure it directly in a laboratory. A Born–Haber cycle lets us calculate it from enthalpy changes that can be measured.

Where Born–Haber Cycles Appear in A Level Chemistry

Born–Haber cycles are part of second-year A Level physical chemistry, usually in a topic called thermodynamics, energetics or enthalpy and entropy, depending on your exam board. They build directly on first-year work on enthalpy changes and Hess’s law.

They often link to:

  • Lattice enthalpy and ionic bonding
  • Enthalpies of solution and hydration
  • Entropy and Gibbs free energy
  • Comparing theoretical and experimental lattice enthalpies

The Enthalpy Definitions You Must Know

Definitions are worth easy marks, but only if they’re precise. Examiners look for key details: one mole, gaseous where relevant, and standard states.

Standard conditions are 298 K and 100 kPa.

Standard Enthalpy of Formation (ΔfH⦵)

The enthalpy change when one mole of a compound is formed from its elements in their standard states, under standard conditions.

Example: Na(s) + ½Cl₂(g) → NaCl(s)

Standard Enthalpy of Atomisation (ΔatH⦵)

The enthalpy change when one mole of gaseous atoms is formed from the element in its standard state, under standard conditions. It is always endothermic.

Examples:
Na(s) → Na(g)
½Cl₂(g) → Cl(g)

Watch out: Atomisation forms one mole of atoms. For chlorine, you only need half a mole of Cl₂ molecules.

First Ionisation Energy

The enthalpy change when one mole of electrons is removed from one mole of gaseous atoms to form one mole of gaseous 1+ ions. It is always endothermic.

Example: Na(g) → Na⁺(g) + e⁻

Second Ionisation Energy

The enthalpy change when one mole of electrons is removed from one mole of gaseous 1+ ions to form one mole of gaseous 2+ ions. It is always endothermic, and larger than the first ionisation energy.

Example: Mg⁺(g) → Mg²⁺(g) + e⁻

First Electron Affinity

The enthalpy change when one mole of gaseous atoms gains one mole of electrons to form one mole of gaseous 1− ions. It is usually exothermic.

Example: Cl(g) + e⁻ → Cl⁻(g)

Second Electron Affinity

The enthalpy change when one mole of gaseous 1− ions gains one mole of electrons to form one mole of gaseous 2− ions. It is endothermic, because an electron is being added to an ion that is already negative, so energy is needed to overcome the repulsion.

Example: O⁻(g) + e⁻ → O²⁻(g)

Lattice Enthalpy

This is the definition that causes the most confusion, because exam boards use different conventions:

  • Lattice enthalpy of formation: The enthalpy change when one mole of a solid ionic compound is formed from its gaseous ions. It is exothermic, so it has a negative value.
    Example: Na⁺(g) + Cl⁻(g) → NaCl(s)
  • Lattice enthalpy of dissociation: The enthalpy change when one mole of a solid ionic compound is broken up into its gaseous ions. It is endothermic, so it has a positive value.
    Example: NaCl(s) → Na⁺(g) + Cl⁻(g)

The two values have the same size but opposite signs.

Top tip: Check which definition your exam board uses, and learn that one word for word. Then read every exam question carefully to see which one it asks for.

Bond Dissociation Enthalpy

The enthalpy change when one mole of a covalent bond is broken in gaseous molecules, forming gaseous atoms.

Example: Cl₂(g) → 2Cl(g)

Trick: For diatomic elements such as chlorine, the enthalpy of atomisation is half the bond dissociation enthalpy, because atomisation forms one mole of atoms, while bond breaking forms two.

How to Draw a Born–Haber Cycle: Step by Step

Born–Haber cycles are drawn as energy level diagrams. Follow these steps every time.

  1. Draw a starting line for the elements in their standard states, such as Na(s) + ½Cl₂(g). This is the zero level.
  2. Draw the compound below the zero line, such as NaCl(s), with a downward arrow labelled with the enthalpy of formation (if it’s exothermic, which it usually is).
  3. Atomise the metal. Draw an upward arrow to a new level, such as Na(g) + ½Cl₂(g).
  4. Atomise the non-metal. Draw another upward arrow, such as Na(g) + Cl(g).
  5. Ionise the metal. Draw an upward arrow for each ionisation energy, with the electrons shown in the species, such as Na⁺(g) + e⁻ + Cl(g).
  6. Add electrons to the non-metal. Draw a downward arrow for the first electron affinity, such as Na⁺(g) + Cl⁻(g). If there’s a second electron affinity, it’s an upward arrow.
  7. Form the lattice. Draw a downward arrow from the gaseous ions to the compound, labelled lattice enthalpy of formation.

Drawing Tips That Earn Marks

  • Up for endothermic, down for exothermic. Always.
  • Include state symbols on every species: (s), (g), (l) or (aq).
  • Show electrons as e⁻ wherever they appear in the cycle.
  • Label every arrow with its name or value.
  • Make each level a balanced set of species. Every level should contain the same atoms, just in different forms.
  • Keep the diagram roughly to scale, so large steps such as ionisation energies look larger than small ones.

Worked Example 1: Born–Haber Cycle for Sodium Chloride (NaCl)

Question: Use the data below to calculate the lattice enthalpy of formation of sodium chloride.

  • Enthalpy of formation of NaCl(s) = −411 kJ mol⁻¹
  • Enthalpy of atomisation of sodium = +107 kJ mol⁻¹
  • Enthalpy of atomisation of chlorine = +122 kJ mol⁻¹
  • First ionisation energy of sodium = +496 kJ mol⁻¹
  • First electron affinity of chlorine = −349 kJ mol⁻¹

The Cycle, Level by Level

Starting from the elements and working upwards:

  1. Na(s) + ½Cl₂(g), the zero level
  2. Up by +107 to Na(g) + ½Cl₂(g)
  3. Up by +122 to Na(g) + Cl(g)
  4. Up by +496 to Na⁺(g) + e⁻ + Cl(g)
  5. Down by 349 to Na⁺(g) + Cl⁻(g)
  6. Down by the lattice enthalpy to NaCl(s), which sits 411 kJ mol⁻¹ below the zero level

The Calculation

By Hess’s law, the direct route equals the indirect route:

ΔfH = ΔatH(Na) + ΔatH(Cl) + IE₁(Na) + EA₁(Cl) + ΔLEH

Substitute the values:

−411 = (+107) + (+122) + (+496) + (−349) + ΔLEH

Add up the known steps:

107 + 122 + 496 − 349 = +376

Rearrange:

ΔLEH = −411 − 376 = −787 kJ mol⁻¹

The lattice enthalpy of formation of sodium chloride is −787 kJ mol⁻¹. The lattice enthalpy of dissociation would be +787 kJ mol⁻¹.

Worked Example 2: Born–Haber Cycle for Magnesium Chloride (MgCl₂)

MgCl₂ is harder, because magnesium forms a 2+ ion and there are two chloride ions. This is where many students lose marks.

Question: Use the data below to calculate the lattice enthalpy of formation of magnesium chloride.

  • Enthalpy of formation of MgCl₂(s) = −641 kJ mol⁻¹
  • Enthalpy of atomisation of magnesium = +148 kJ mol⁻¹
  • Enthalpy of atomisation of chlorine = +122 kJ mol⁻¹
  • First ionisation energy of magnesium = +738 kJ mol⁻¹
  • Second ionisation energy of magnesium = +1451 kJ mol⁻¹
  • First electron affinity of chlorine = −349 kJ mol⁻¹

The Key Differences

  • Two ionisation energies: Magnesium loses two electrons, so you need both the first and second ionisation energies.
  • Two chlorine atoms: You need to atomise two moles of chlorine atoms, so multiply the atomisation enthalpy by 2.
  • Two chloride ions: You need two electron affinities, so multiply the first electron affinity by 2.

The Calculation

ΔfH = ΔatH(Mg) + 2 × ΔatH(Cl) + IE₁(Mg) + IE₂(Mg) + 2 × EA₁(Cl) + ΔLEH

Substitute the values:

−641 = (+148) + (2 × +122) + (+738) + (+1451) + (2 × −349) + ΔLEH

Work out each part:

  • 2 × 122 = +244
  • 2 × −349 = −698

Add up the known steps:

148 + 244 + 738 + 1451 − 698 = +1883

Rearrange:

ΔLEH = −641 − 1883 = −2524 kJ mol⁻¹

Notice: The lattice enthalpy of MgCl₂ is much more exothermic than that of NaCl. This is mainly because the Mg²⁺ ion has a higher charge and is smaller than Na⁺, so it attracts chloride ions more strongly.

Practice Question: Magnesium Oxide (MgO)

Try this one yourself before checking the answer.

Question: Calculate the lattice enthalpy of formation of magnesium oxide using the data below.

  • Enthalpy of formation of MgO(s) = −602 kJ mol⁻¹
  • Enthalpy of atomisation of magnesium = +148 kJ mol⁻¹
  • Enthalpy of atomisation of oxygen = +249 kJ mol⁻¹
  • First ionisation energy of magnesium = +738 kJ mol⁻¹
  • Second ionisation energy of magnesium = +1451 kJ mol⁻¹
  • First electron affinity of oxygen = −141 kJ mol⁻¹
  • Second electron affinity of oxygen = +798 kJ mol⁻¹

Hint: Oxygen forms O²⁻, so you need two electron affinities, and the second one is endothermic.

Answer:

Sum of known steps = 148 + 249 + 738 + 1451 − 141 + 798 = +3243 kJ mol⁻¹

ΔLEH = −602 − 3243 = −3845 kJ mol⁻¹

If you got a different answer, check whether you used the correct sign for the second electron affinity. It’s positive.

Born–Haber Cycle Tips and Tricks

Trick 1: “Up Is In, Down Is Out”

Endothermic steps take energy in, so they go up. Exothermic steps give energy out, so they go down. If an arrow points the wrong way, your diagram is wrong.

Trick 2: Use the “Two Routes” Rule

Whichever way you go around the cycle, from the elements to the compound, the total enthalpy change is the same. Write it as:

Direct route = indirect route

Then rearrange for the unknown. This works for any missing value, not just lattice enthalpy.

Trick 3: Count Your Atoms and Ions

Before you calculate, check the formula. For every compound, ask:

  • How many moles of metal atoms need atomising?
  • How many moles of non-metal atoms need atomising?
  • How many electrons does each metal atom lose?
  • How many electrons does each non-metal atom gain?

For MgCl₂, that’s one magnesium atom losing two electrons, and two chlorine atoms each gaining one electron.

Trick 4: Halve the Bond Enthalpy

If a question gives you the bond dissociation enthalpy for Cl₂ instead of the atomisation enthalpy, halve it to get the enthalpy of atomisation for one mole of chlorine atoms.

Trick 5: Use the Values in the Question

Data values vary slightly between textbooks and data books. Always use the exact values given in the question, not ones you’ve memorised.

Trick 6: Brackets for Signs

Write every value in brackets with its sign, such as (−349). This stops sign errors when you add and subtract.

Trick 7: Sense-Check Your Answer

Lattice enthalpies of formation are large and negative, usually several hundred to several thousand kJ mol⁻¹. If your answer is positive or very small, check your signs.

The Most Common Born–Haber Cycle Mistakes

  • Forgetting to double values for compounds such as MgCl₂ or Na₂O
  • Missing the second ionisation energy for 2+ ions
  • Giving the second electron affinity a negative sign. It’s endothermic.
  • Using the full bond enthalpy instead of the atomisation enthalpy
  • Mixing up lattice formation and dissociation
  • Missing state symbols or electrons on the diagram
  • Drawing arrows in the wrong direction
  • Writing definitions without “one mole” or “gaseous”
  • Forgetting units: always kJ mol⁻¹

Factors That Affect Lattice Enthalpy

Exam questions often ask you to compare or explain lattice enthalpies. Two factors matter most.

Ionic Charge

The higher the charges on the ions, the stronger the electrostatic attraction between them, and the more exothermic the lattice enthalpy of formation.

Example: MgO has a much more exothermic lattice enthalpy than NaCl, because Mg²⁺ and O²⁻ have double the charges of Na⁺ and Cl⁻.

Ionic Radius

The smaller the ions, the closer they can pack together, the stronger the attraction, and the more exothermic the lattice enthalpy of formation.

Example: Lattice enthalpies become less exothermic down Group 7, from fluorides to iodides, because the halide ions get larger.

Exam tip: Always explain in terms of the strength of attraction between oppositely charged ions. Mention both charge and size when comparing compounds.

Theoretical vs Experimental Lattice Enthalpy

There are two ways to find a lattice enthalpy:

  • Experimental value: Calculated from a Born–Haber cycle, using measured data.
  • Theoretical value: Calculated using a perfect ionic model, which assumes the ions are perfect spheres with evenly spread charge, and that the bonding is 100% ionic.

What the Difference Tells You

  • Values agree closely: The compound is almost completely ionic. NaCl is a good example.
  • Experimental value is more exothermic than the theoretical value: The compound has some covalent character.

Why Covalent Character Happens

A small, highly charged positive ion can polarise a large negative ion, distorting its electron cloud towards the positive ion. This pulls electron density between the ions, giving the bond some covalent character and making the lattice stronger than the ionic model predicts.

Polarisation is greatest when:

  • The positive ion is small and highly charged
  • The negative ion is large and easily distorted

Linked Topics: Enthalpy of Solution and Hydration

Born–Haber cycles often appear alongside dissolving cycles, which use the same Hess’s law logic:

  • Enthalpy of solution: The enthalpy change when one mole of an ionic solid dissolves in water to form an infinitely dilute solution.
  • Enthalpy of hydration: The enthalpy change when one mole of gaseous ions dissolves in water to form one mole of aqueous ions.

These cycles link lattice enthalpy with the energy released when ions are surrounded by water molecules, and they’re common in exam questions combining several ideas.

Born–Haber Cycle Exam Checklist

Before your exam, make sure you can:

  • Define enthalpy of formation, atomisation, ionisation energy, electron affinity and lattice enthalpy, word for word
  • State which lattice enthalpy convention your exam board uses
  • Draw a fully labelled Born–Haber cycle with state symbols and electrons
  • Calculate lattice enthalpy for a 1+/1− compound such as NaCl
  • Calculate lattice enthalpy for a compound with 2+ or 2− ions, such as MgCl₂ or MgO
  • Calculate any other missing value from a cycle, such as an electron affinity
  • Explain how ionic charge and ionic radius affect lattice enthalpy
  • Explain differences between theoretical and experimental lattice enthalpies
  • Link Born–Haber cycles to enthalpies of solution and hydration

How to Revise Born–Haber Cycles Effectively

  • Learn definitions with active recall. Write them out from memory, then check every word.
  • Draw cycles from a blank page. Don’t just read finished diagrams. Practise drawing them yourself.
  • Practise different compounds. Work through 1+/1−, 2+/1− and 2+/2− compounds.
  • Practise finding different unknowns. Exam questions don’t always ask for lattice enthalpy.
  • Space your practice. Return to Born–Haber cycles every week or two, so the method stays secure.
  • Use mark schemes. Check exactly how marks are awarded for diagrams and calculations.

A Level Chemistry Resources for Born–Haber Cycles

Chemistry Toolkit has teacher-written A Level chemistry resources to help you master energetics and every other A Level topic:

Resources also cover International A Level chemistry. The Student plan costs £89.99 a year. Find out more for students.

Frequently Asked Questions

What is a Born–Haber cycle?

A Born–Haber cycle is an energy cycle, based on Hess’s law, that shows all the enthalpy changes involved in forming an ionic compound from its elements. It is mainly used to calculate lattice enthalpy, which can’t be measured directly.

How do you calculate lattice enthalpy from a Born–Haber cycle?

Use Hess’s law: the enthalpy of formation equals the sum of all the other steps in the cycle, including lattice enthalpy. Add up all the known steps, then subtract this total from the enthalpy of formation to find the lattice enthalpy of formation.

Why is the second electron affinity endothermic?

The second electron affinity adds an electron to a negative ion. The negative ion repels the incoming electron, so energy must be put in to overcome this repulsion.

Why is lattice enthalpy of formation exothermic?

When gaseous ions come together to form a solid lattice, strong electrostatic attractions form between oppositely charged ions. Forming these attractions releases energy, so the process is exothermic.

What is the difference between lattice enthalpy of formation and dissociation?

Lattice enthalpy of formation is the enthalpy change when one mole of an ionic solid forms from its gaseous ions, and it is exothermic. Lattice enthalpy of dissociation is the reverse process, and it is endothermic. They have the same size but opposite signs.

Why do you double values in the MgCl₂ Born–Haber cycle?

Magnesium chloride contains two chloride ions for each magnesium ion. You need to atomise two moles of chlorine atoms and add electrons to two moles of chlorine atoms, so the atomisation enthalpy and electron affinity of chlorine are both multiplied by 2.

What does a difference between theoretical and experimental lattice enthalpy show?

If the experimental value is more exothermic than the theoretical value, the compound has some covalent character. This happens when a small, highly charged positive ion polarises a large negative ion.

Are Born–Haber cycles AS or A Level?

Born–Haber cycles are usually taught in the second year of A Level chemistry, as part of thermodynamics or energetics. They build on first-year work on enthalpy changes and Hess’s law.

Why are ionisation energies always endothermic?

Removing an electron requires energy to overcome the attraction between the negative electron and the positive nucleus, so ionisation energies are always endothermic.

How do I remember the steps of a Born–Haber cycle?

Follow the same order every time: atomise the metal, atomise the non-metal, ionise the metal, add electrons to the non-metal, then form the lattice. Endothermic steps go up and exothermic steps go down.

Conclusion: Master Born–Haber Cycles With Practice

Born–Haber cycles follow the same logic every time: Hess’s law, a consistent order of steps, and careful attention to signs and moles. Learn the definitions word for word, draw cycles from a blank page, and practise calculations with different types of ionic compound.

With regular practice, Born–Haber cycles go from one of the most feared A Level chemistry topics to some of the most reliable marks on your paper.

Chemistry Toolkit has A Level chemistry worksheets, knowledge organisers and recall questions to help you master energetics and every other topic.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime