Skip to content

← All articles

17 min read

A Level Chemistry Practicals: Complete Revision Guide to Required Practicals (2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

A Level chemistry practicals aren’t just something you do in the lab and forget. Practical skills are tested in your written exams too, and questions on titrations, purification, chemical tests and uncertainties appear on every paper. Students who understand why each step of a method matters pick up these marks easily. Students who only memorise methods often lose them.

This guide covers every major A Level chemistry practical technique: titrations, enthalpy changes, rates of reaction, inorganic and organic tests, reflux and distillation, purifying organic liquids and solids, chromatography, electrochemical cells and pH curves. For each one, you’ll find the method, the reasons behind key steps and the questions examiners ask. It also explains the practical endorsement, accuracy and precision, percentage uncertainty, and includes exam-style questions with answers.

Quick summary: A Level chemistry practicals

  • AQA has 12 required practicals. OCR A has 12 Practical Activity Groups (PAGs). Edexcel has 16 core practicals.
  • In England, practical competence is assessed by your teacher through the practical endorsement, reported separately from your grade.
  • At least 15% of marks in the written exams test practical skills.
  • Exam questions focus on why each step is done, sources of error and uncertainty calculations.

How Practicals Are Assessed at A Level

The Practical Endorsement

In England, A Level chemistry students complete a set of practical activities during the course. Teachers assess them against the Common Practical Assessment Criteria (CPAC):

  1. Follows written procedures
  2. Applies investigative approaches and methods when using instruments and equipment
  3. Safely uses a range of practical equipment and materials
  4. Makes and records observations
  5. Researches, references and reports

The practical endorsement is reported separately from your A Level grade. Universities may still look at it, so keep good lab records.

Practical Skills in the Written Exams

Practical knowledge is also tested in your written papers. Questions might ask you to:

  • Describe or evaluate a method
  • Explain why a particular step is carried out
  • Identify hazards and precautions
  • Process and analyse data
  • Calculate percentage uncertainties and errors
  • Suggest improvements to an experiment

Some papers, such as AQA Paper 3, include a large number of practical-based questions, so this topic is worth a lot of marks.

Key Practical Vocabulary

Use these terms precisely. Examiners look for the correct word.

  • Accurate: Close to the true value.
  • Precise: Repeated measurements are close together.
  • Repeatable: The same person gets similar results using the same method and equipment.
  • Reproducible: Similar results are obtained by different people, or with different equipment or methods.
  • Valid: The experiment measures what it’s meant to measure, and only one variable is changed.
  • Resolution: The smallest change an instrument can detect.
  • Uncertainty: The range within which the true value is likely to lie.
  • Systematic error: An error that shifts all results in the same direction, such as a balance that always reads too high.
  • Random error: Unpredictable variation that affects results differently each time.
  • Anomalous result: A result that doesn’t fit the pattern of the others.

Percentage Uncertainty and Error

Uncertainty in a Single Reading

For most instruments, the uncertainty is half the smallest division. Some uncertainties are printed on the equipment, such as on a pipette or volumetric flask.

Uncertainty When Two Readings Are Used

If a value is found by subtracting two readings, such as a burette titre or a mass found by difference, double the uncertainty of one reading.

  • A burette reading has an uncertainty of ±0.05 cm³. A titre uses two readings, so its uncertainty is ±0.10 cm³.

Calculating Percentage Uncertainty

Percentage uncertainty = (uncertainty ÷ measured value) × 100

Worked example: A titre is 24.50 cm³, with an uncertainty of ±0.10 cm³.

Percentage uncertainty = (0.10 ÷ 24.50) × 100 = 0.41%

How to Reduce Percentage Uncertainty

  • Use larger volumes or masses, so the same uncertainty is a smaller percentage.
  • Use equipment with a higher resolution, such as a balance reading to 0.001 g instead of 0.01 g.

Percentage Error

Percentage error = (|experimental value − accepted value| ÷ accepted value) × 100

If the percentage error is much larger than the total percentage uncertainty, the difference is likely to be caused by systematic errors or a flaw in the method, not just measurement uncertainty.

1. Making a Standard Solution and Acid–Base Titration

AQA: Required Practical 1 | OCR A: PAG 1 and PAG 2

Making a Standard Solution

  1. Weigh the solid accurately in a weighing boat, then reweigh the boat after transferring the solid (weighing by difference).
  2. Dissolve the solid in a small volume of distilled water in a beaker.
  3. Transfer the solution to a volumetric flask using a funnel.
  4. Rinse the beaker and funnel with distilled water, adding the rinsings to the flask.
  5. Make up to the mark with distilled water, so the bottom of the meniscus sits on the line at eye level. Add the last drops with a dropping pipette.
  6. Stopper and invert the flask several times to mix.

Why weigh by difference? Any solid left in the weighing boat isn’t counted, so the mass transferred is accurate.

Why add the rinsings? To make sure all of the solid ends up in the flask.

Carrying Out a Titration

  1. Rinse the burette with the solution it will contain, then fill it, making sure the tip has no air bubbles.
  2. Rinse the pipette with the solution it will measure, then use it to transfer a known volume into a conical flask.
  3. Add a few drops of indicator to the conical flask.
  4. Place the flask on a white tile, so the colour change is easy to see.
  5. Run in the solution from the burette while swirling the flask.
  6. Do a rough titration first, then accurate titrations, adding the solution dropwise near the end point.
  7. Repeat until you have concordant titres, usually within 0.10 cm³ of each other.
  8. Calculate the mean of the concordant titres only.

Why Each Step Matters

  • Rinsing the burette and pipette with the solution: Any water left inside would dilute the solution and change its concentration.
  • Rinsing the conical flask with distilled water: This is fine, because adding water doesn’t change the number of moles in the flask.
  • Reading the burette: Read from the bottom of the meniscus, at eye level.
  • Removing the funnel: Remove the funnel from the burette before titrating, so drops don’t fall in and change the reading.

Choosing an Indicator

  • Strong acid + strong base: Phenolphthalein or methyl orange
  • Weak acid + strong base: Phenolphthalein
  • Strong acid + weak base: Methyl orange
  • Weak acid + weak base: No suitable indicator, because there’s no sharp pH change

The indicator must change colour within the steep, vertical section of the pH curve.

2. Measuring an Enthalpy Change

AQA: Required Practical 2 | OCR A: PAG 3

Method

  1. Measure a known volume of one solution into a polystyrene cup, supported in a beaker, with a lid.
  2. Record its temperature every minute for a few minutes before mixing.
  3. At a known time, add the second reactant and stir.
  4. Continue recording the temperature every minute after mixing.
  5. Plot temperature against time.
  6. Extrapolate the cooling part of the graph back to the time of mixing, to find the maximum temperature change.

Why Each Step Matters

  • Polystyrene cup and lid: Reduce heat loss to the surroundings.
  • Taking readings before mixing: Gives a reliable starting temperature.
  • Extrapolating the cooling curve: Heat is lost while the reaction happens, so the highest recorded temperature is lower than the true maximum. Extrapolation corrects for this.

Calculating ΔH

Use q = mcΔT, where m is the mass of the solution, then ΔH = −q ÷ moles. For a full guide, read our article on Hess’s law and enthalpy calculations.

Sources of Error

  • Heat loss to the surroundings
  • Assuming the solution has the same density and specific heat capacity as water
  • Incomplete reaction

3. Rates of Reaction

AQA: Required Practicals 3 and 7 | OCR A: PAG 9 and PAG 10

Continuous Monitoring Methods

Measure a property at regular intervals as the reaction happens:

  • Volume of gas using a gas syringe
  • Loss of mass as a gas escapes, using a balance
  • Colour change using a colorimeter

These give a concentration–time graph. The rate at any point is the gradient of a tangent.

Initial Rate Methods: Clock Reactions

In a clock reaction, you measure the time taken for a fixed amount of reaction, often shown by a sudden colour change.

  • Initial rate ∝ 1 ÷ time
  • Example: Sodium thiosulfate reacts with hydrochloric acid to form a sulfur precipitate. The time for a cross under the flask to disappear is measured.
  • Example: In iodine clock reactions, a blue-black colour appears suddenly when a fixed amount of iodine has formed.

Investigating the Effect of Temperature

  • Use a water bath to keep the reactants at a set temperature.
  • Allow the reactants to reach the temperature before mixing.
  • Repeat at several temperatures.
  • The results can be used to plot an Arrhenius graph and calculate the activation energy.

For more detail, read our guide to rate equations.

4. Tests for Inorganic Ions

AQA: Required Practicals 4 and 11 | OCR A: PAG 4

Tests for Anions

  • Carbonate (CO₃²⁻): Add dilute acid. Bubbles form, and the gas turns limewater cloudy.
  • Sulfate (SO₄²⁻): Add acidified barium chloride solution. A white precipitate forms.
  • Halides (Cl⁻, Br⁻, I⁻): Add dilute nitric acid, then silver nitrate solution.
  • Chloride: white precipitate
  • Bromide: cream precipitate
  • Iodide: yellow precipitate
  • Hydroxide (OH⁻): Turns red litmus paper blue.

The Correct Order of Anion Tests

If a solution could contain several anions, test in this order:

  1. Carbonate first, because carbonate ions would also form precipitates with barium and silver ions.
  2. Sulfate next, because sulfate ions can form a precipitate with silver ions.
  3. Halides last.

Confirming Halides With Ammonia

  • Silver chloride: Dissolves in dilute ammonia.
  • Silver bromide: Dissolves in concentrated ammonia.
  • Silver iodide: Doesn’t dissolve in concentrated ammonia.

Test for Ammonium Ions (NH₄⁺)

Add sodium hydroxide solution and warm. Ammonia gas is given off, which turns damp red litmus paper blue.

Tests for Transition Metal Ions

Add sodium hydroxide solution dropwise, then in excess:

  • Cu²⁺: Blue precipitate
  • Fe²⁺: Green precipitate, which slowly turns orange-brown at the surface in air
  • Fe³⁺: Orange-brown precipitate
  • Cr³⁺: Grey-green precipitate, which dissolves in excess sodium hydroxide to form a green solution

Adding ammonia solution:

  • Cu²⁺: Blue precipitate, which dissolves in excess ammonia to form a deep blue solution

Exam boards differ on which ions and reagents they include, so check your specification.

5. Tests for Organic Functional Groups

AQA: Required Practical 6 | OCR A: PAG 7

  • Alkene: Add bromine water. It changes from orange to colourless.
  • Primary or secondary alcohol: Warm with acidified potassium dichromate(VI). It changes from orange to green. Tertiary alcohols give no change.
  • Aldehyde:
  • Warm with Tollens’ reagent. A silver mirror forms.
  • Or warm with Fehling’s solution. A brick-red precipitate forms.
  • Ketones give no change in either test.
  • Carboxylic acid: Add sodium carbonate or sodium hydrogencarbonate. Bubbles form, and the gas turns limewater cloudy.

Safety: Heat organic compounds in a water bath, not with a Bunsen burner, because many are flammable.

6. Reflux and Distillation

AQA: Required Practical 5 | OCR A: PAG 5

Heating Under Reflux

Reflux means heating a reaction mixture with a vertical condenser fitted to the flask.

Why use reflux?

  • Volatile reactants and products condense and return to the flask, so they aren’t lost.
  • The mixture can be heated for a long time, so the reaction goes to completion.
  • For example, alcohols are fully oxidised to carboxylic acids by heating under reflux with acidified potassium dichromate(VI).

Key safety points:

  • Add anti-bumping granules for smooth boiling.
  • Never seal the top of the condenser, or pressure would build up.
  • Water enters the condenser at the bottom and leaves at the top, so the condenser stays full of cold water.

Distillation

Distillation separates liquids with different boiling points.

Key points:

  • Place the thermometer bulb level with the side arm of the flask, so it measures the temperature of the vapour leaving.
  • Collect the fraction that distils at the boiling point of the product.
  • For example, distilling an aldehyde as it forms stops it from being oxidised further to a carboxylic acid.

7. Purifying an Organic Liquid

AQA: Required Practical 10 | OCR A: PAG 5

  1. Separate the layers in a separating funnel. Remove the aqueous layer.
  2. Wash with sodium hydrogencarbonate solution to remove acidic impurities. Release the pressure regularly, because carbon dioxide forms.
  3. Wash with water, then separate the layers again.
  4. Dry the organic layer with an anhydrous drying agent, such as anhydrous magnesium sulfate or calcium chloride, until the liquid is clear.
  5. Filter or decant the liquid away from the drying agent.
  6. Redistil, collecting the fraction at the product’s boiling point.

8. Purifying an Organic Solid and Testing Its Purity

AQA: Required Practical 10 | OCR A: PAG 6

Recrystallisation

  1. Dissolve the impure solid in the minimum volume of hot solvent.
  2. Filter while hot, to remove insoluble impurities.
  3. Cool slowly, so pure crystals form. Soluble impurities stay dissolved.
  4. Filter under reduced pressure using a Büchner funnel, to collect the crystals.
  5. Wash with a small amount of cold solvent.
  6. Dry the crystals.

Why the minimum volume of hot solvent? So the solution is saturated, and as much product as possible crystallises on cooling, giving a higher yield.

Why wash with cold solvent? To remove soluble impurities from the crystal surfaces without dissolving much of the product.

Testing Purity With Melting Point

  • A pure solid melts at a sharp, specific temperature that matches the data book value.
  • An impure solid melts at a lower temperature and over a wider range.

9. Thin-Layer Chromatography (TLC)

AQA: Required Practical 12

Method

  1. Draw a baseline in pencil near the bottom of the TLC plate.
  2. Spot the samples on the baseline.
  3. Place the plate in a beaker with solvent below the baseline, and cover with a lid.
  4. Remove the plate when the solvent is near the top, and mark the solvent front.
  5. Locate colourless spots using a UV lamp or a chemical such as iodine.
  6. Calculate Rf values.

Rf = distance moved by spot ÷ distance moved by solvent

Why Each Step Matters

  • Pencil baseline: Pencil won’t dissolve in the solvent, but ink would.
  • Solvent below the baseline: Otherwise, the samples would dissolve into the solvent in the beaker.
  • Lid on the beaker: Keeps the atmosphere saturated with solvent vapour, so the solvent doesn’t evaporate from the plate.

Why Substances Separate

Different substances have different relative affinities for the stationary phase (the plate) and the mobile phase (the solvent). Substances more strongly attracted to the stationary phase move more slowly, giving lower Rf values.

10. Electrochemical Cells

AQA: Required Practical 8 | OCR A: PAG 8

Method

  1. Clean the metal electrodes with emery paper to remove oxide layers.
  2. Place each electrode in a solution of its own ions, at 1.00 mol dm⁻³.
  3. Connect the two solutions with a salt bridge, such as filter paper soaked in saturated potassium nitrate solution.
  4. Connect the electrodes to a high-resistance voltmeter.
  5. Record the EMF.

Why Each Step Matters

  • Salt bridge: Completes the circuit by allowing ions to move, without the solutions mixing. Potassium nitrate is used because it doesn’t react with the ions in the half-cells.
  • High-resistance voltmeter: Stops current from flowing, so the maximum potential difference is measured.
  • Standard conditions: 1.00 mol dm⁻³ solutions, 298 K and 100 kPa, so the results can be compared with standard electrode potentials.

11. pH Curves

AQA: Required Practical 9 | OCR A: PAG 11

Method

  1. Calibrate the pH meter using buffer solutions of known pH.
  2. Place a known volume of acid in a beaker.
  3. Add the base from a burette in small portions, recording the pH after each addition.
  4. Add smaller portions near the equivalence point, where the pH changes rapidly.
  5. Plot pH against the volume of base added.

Using the pH Curve

  • The equivalence point is in the middle of the steep section.
  • For a weak acid, the pH at the half-equivalence point equals the pKa of the acid.

Safety and Risk Assessment

Common hazards in A Level chemistry practicals include:

  • Corrosive acids and alkalis: Wear eye protection and gloves.
  • Flammable organic liquids: Heat with a water bath or electric heater, never a naked flame.
  • Toxic gases, such as chlorine or bromine: Use a fume cupboard.
  • Harmful heavy metal compounds: Avoid skin contact, and dispose of waste correctly.
  • Pressure build-up: Never heat a sealed system, and release pressure from separating funnels.

Exam tip: When asked for a safety precaution, link it to a specific hazard. “Wear goggles because the acid is corrosive” scores. “Be careful” doesn’t.

Exam-Style Practice Questions

Try these, then check the answers below.

  1. Explain why the burette is rinsed with the solution it will contain, but the conical flask is rinsed with distilled water. (2 marks)
  2. A student measures a titre of 18.20 cm³. Each burette reading has an uncertainty of ±0.05 cm³. Calculate the percentage uncertainty in the titre. (2 marks)
  3. Suggest one change that would reduce the percentage uncertainty in question 2. (1 mark)
  4. Explain why the maximum temperature in an enthalpy experiment is found by extrapolation. (2 marks)
  5. Explain why a reaction mixture is heated under reflux, rather than in an open flask. (2 marks)
  6. Explain why the minimum volume of hot solvent is used in recrystallisation. (1 mark)
  7. A student’s sample of aspirin melts between 128 °C and 133 °C. The data book value is 136 °C. What does this show? (2 marks)
  8. Explain why the pressure must be released when shaking an organic liquid with sodium hydrogencarbonate solution in a separating funnel. (1 mark)
  9. An unknown solution gives a cream precipitate with acidified silver nitrate, which dissolves in concentrated ammonia but not dilute ammonia. Identify the anion. (1 mark)
  10. Explain why the baseline on a TLC plate is drawn in pencil. (1 mark)

Answers

  1. Water left in the burette would dilute the solution, changing its concentration. Water in the conical flask doesn’t change the number of moles of reactant. (2)
  2. Titre uncertainty = 2 × 0.05 = ±0.10 cm³. Percentage uncertainty = (0.10 ÷ 18.20) × 100 = 0.55% (2)
  3. Use a larger volume in the conical flask, or a more dilute solution in the burette, so the titre is larger. (1)
  4. Heat is lost to the surroundings during the reaction, so the highest recorded temperature is lower than the true maximum. Extrapolating the cooling curve back to the time of mixing corrects for heat loss. (2)
  5. The condenser stops volatile reactants and products escaping, by condensing them and returning them to the flask. This allows the mixture to be heated for longer so the reaction goes to completion. (2)
  6. So the solution becomes saturated and as much product as possible crystallises on cooling, giving a higher yield. (1)
  7. The sample is impure, because it melts below the data book value and over a range of temperatures. (2)
  8. The reaction with acidic impurities produces carbon dioxide gas, which builds up pressure. (1)
  9. Bromide ions (1)
  10. Pencil is insoluble in the solvent, so it won’t move up the plate and interfere with the results. Ink would dissolve. (1)

The Most Common Practical Mistakes in Exams

  • Vague safety answers, such as “be careful”, without linking to a hazard
  • Forgetting to double the uncertainty when two readings are subtracted
  • Using all titres to calculate the mean, instead of only concordant ones
  • Saying the conical flask should be rinsed with the solution
  • Mixing up reflux and distillation
  • Forgetting the observation in chemical tests, such as “a white precipitate forms”
  • Not explaining why a step is done, when the question asks for an explanation
  • Confusing accuracy and precision

How to Revise A Level Chemistry Practicals

  1. List the practicals on your exam board’s specification.
  2. For each practical, learn the method, the reason for each key step, the hazards and the sources of error.
  3. Draw and label apparatus, such as reflux, distillation and electrochemical cell set-ups.
  4. Practise uncertainty calculations until they’re automatic.
  5. Learn the chemical tests and observations using flashcards.
  6. Practise exam questions that ask you to evaluate or improve a method.
  7. Use spaced retrieval practice to keep methods and tests fresh across the course.

A Level Chemistry Resources for Practicals

Chemistry Toolkit has teacher-written resources for AS Level and A Level chemistry to help you master practical skills:

  • Worksheets with practical-based questions on methods, data analysis and uncertainty, with full answers
  • Knowledge organisers summarising chemical tests, techniques and observations on one page
  • Rapid Recall sets to keep tests, colours and methods fresh
  • Exam practice with topic tests and full mark schemes, including practical questions
  • Misconception resources that catch common errors, such as confusing accuracy and precision

Resources also cover International AS Level and International A Level chemistry. Find out more for students, or see the pricing page for plan details.

Frequently Asked Questions

How many required practicals are there in A Level chemistry?

AQA has 12 required practicals. OCR A has 12 Practical Activity Groups (PAGs). Edexcel has 16 core practicals. Check your specification for the full list.

Are A Level chemistry practicals examined?

Yes. At least 15% of marks in the written exams test practical skills. In England, practical competence is also assessed separately by your teacher through the practical endorsement.

What is the practical endorsement?

The practical endorsement is a separate assessment of practical skills, carried out by your teacher during the course, using the Common Practical Assessment Criteria. It’s reported separately from your A Level grade.

How do you calculate percentage uncertainty?

Divide the uncertainty by the measured value and multiply by 100. If a value comes from two readings, such as a titre, double the uncertainty of one reading first.

What is the difference between accuracy and precision?

Accuracy is how close a result is to the true value. Precision is how close repeated measurements are to each other.

Why is heating under reflux used?

Reflux stops volatile substances escaping by condensing them and returning them to the flask. This allows the mixture to be heated for a long time so the reaction goes to completion.

How do you test the purity of an organic solid?

Measure its melting point. A pure solid melts sharply at the data book value. An impure solid melts at a lower temperature and over a range.

What are concordant titres?

Concordant titres are titration results that are close together, usually within 0.10 cm³ of each other. Only concordant titres are used to calculate the mean titre.

Why is a salt bridge used in an electrochemical cell?

A salt bridge completes the circuit by allowing ions to move between the half-cells, without the solutions mixing.

Conclusion: Master A Level Chemistry Practicals

A Level chemistry practicals reward students who understand the reasons behind every step. Learn the method for each technique, know why each step matters, link safety precautions to specific hazards, and practise uncertainty calculations until they’re automatic.

With these skills, practical questions become some of the most predictable marks across all your A Level chemistry papers.

Chemistry Toolkit has A Level chemistry worksheets, knowledge organisers and exam practice to help you master practical skills and every other topic.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime