Skip to content

← All articles

14 min read

A Level Chemistry Paper 2: Practice Questions and Answers (2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

A Level Chemistry Paper 2 is where organic chemistry takes centre stage. On most exam boards, it combines organic reactions, mechanisms, synthesis and spectroscopy with physical chemistry calculations. Many students find it the most demanding paper, because it needs a huge amount of knowledge about reagents and conditions, plus the ability to apply mechanisms to unfamiliar molecules.

This guide explains what’s on A Level Chemistry Paper 2 for each exam board, then gives you 15 original exam-style practice questions with full mark-scheme-style answers. The questions cover isomerism, alkenes, halogenoalkanes, alcohols, carbonyl compounds, acyl chlorides, aromatic chemistry, amines, polymers, synthesis, spectroscopy, rate equations, equilibria and yield calculations. You’ll also find exam technique tips and common mistakes.

Quick summary: how to use this page

  1. Check which topics your exam board’s Paper 2 covers.
  2. Attempt each question without notes, ideally under timed conditions.
  3. Mark your answers using the mark-scheme-style answers.
  4. Note every mistake, and revise those topics.
  5. Then practise official past papers from your exam board’s website.

What’s on A Level Chemistry Paper 2?

Paper 2 content differs between exam boards, so check your specification.

AQA A Level Chemistry (7405) Paper 2

  • Title: Physical and organic chemistry
  • Length: 2 hours
  • Marks: 105
  • Weighting: 35% of the A Level
  • Topics: Relevant physical chemistry topics, such as amount of substance, energetics, kinetics, equilibria and rate equations, plus all of the organic chemistry

Edexcel A Level Chemistry (9CH0) Paper 2

  • Title: Advanced organic and physical chemistry
  • Length: 1 hour 45 minutes
  • Marks: 90
  • Weighting: 30% of the A Level

OCR A Level Chemistry A (H432) Paper 2

  • Title: Synthesis and analytical techniques
  • Length: 2 hours 15 minutes
  • Marks: 100
  • Weighting: 37% of the A Level

If you take OCR Chemistry B (Salters), Paper 2 is organised differently, so check your specification for its details.

What Every Paper 2 Has in Common

  • Organic chemistry makes up a large share of the marks.
  • At least 20% of marks across A Level chemistry assess mathematical skills.
  • At least 15% of marks test practical skills, so expect questions on techniques such as reflux, distillation and purification.
  • Questions often present unfamiliar molecules, so you need to apply your knowledge, not just recall it.

Always check your exam board’s latest specification for the exact topics and paper details.

How to Use These Practice Questions

  • Answer without notes to get an honest picture of what you know.
  • Time yourself, aiming for about one minute per mark, plus reading time.
  • Show all working in calculations, and draw structures clearly.
  • Mark strictly using the answers below.
  • Learn from mistakes. For each question you get wrong, revise the topic, then try a similar question a few days later.

Section A: Isomerism and Naming

Question 1: Naming and Optical Isomerism (4 marks)

(a) Give the IUPAC name of CH₃CH(OH)CH₂CH₃. (1 mark)

(b) This molecule shows optical isomerism. Explain why. (2 marks)

(c) State how the two optical isomers could be distinguished. (1 mark)

Answers:

(a) Butan-2-ol (1)

(b)

  • The molecule contains a chiral carbon atom (carbon 2). (1)
  • This carbon is bonded to four different groups, so it forms two non-superimposable mirror images. (1)

(c) They rotate plane-polarised light in opposite directions. (1)

Question 2: E/Z Isomerism (3 marks)

Explain why but-2-ene exists as E and Z isomers, but but-1-ene does not.

Answer:

  • There is restricted rotation around the C=C double bond. (1)
  • In but-2-ene, each carbon in the C=C double bond is attached to two different groups (H and CH₃). (1)
  • In but-1-ene, one carbon in the C=C double bond is attached to two identical groups (two H atoms), so E/Z isomers aren’t possible. (1)

Section B: Alkenes and Halogenoalkanes

Question 3: Electrophilic Addition (5 marks)

Propene reacts with hydrogen bromide to form two products.

(a) Name the type of mechanism. (1 mark)

(b) Name the major product, and explain why it’s the major product. (3 marks)

(c) Describe the first step of the mechanism, in terms of electron movement. (1 mark)

Answers:

(a) Electrophilic addition (1)

(b)

  • The major product is 2-bromopropane. (1)
  • It forms via a secondary carbocation, which is more stable than the primary carbocation. (1)
  • The secondary carbocation is stabilised by the electron-releasing (positive inductive) effect of two alkyl groups. (1)

(c) A pair of electrons from the C=C double bond moves to the Hδ+ of HBr, and the H–Br bond breaks heterolytically, with both electrons going to bromine. (1)

Examiner tip: In a drawn mechanism, the first curly arrow must start from the middle of the double bond, and the second from the H–Br bond to Br.

Question 4: Substitution vs Elimination (4 marks)

2-Bromopropane reacts with potassium hydroxide under two different sets of conditions.

(a) Name the organic product, and the type of reaction, when the conditions are aqueous potassium hydroxide, heated under reflux. (2 marks)

(b) Name the organic product, and the type of reaction, when the conditions are potassium hydroxide dissolved in ethanol, heated. (2 marks)

Answers:

(a)

  • Propan-2-ol (1)
  • Nucleophilic substitution (1)

(b)

  • Propene (1)
  • Elimination (1)

Memory trick: “Water makes alcohol, ethanol makes alkene.”

Section C: Alcohols and Carbonyl Compounds

Question 5: Oxidation of Alcohols (5 marks)

(a) State the reagents and conditions needed to oxidise ethanol to ethanal, and explain why these conditions stop further oxidation. (3 marks)

(b) State the colour change seen in the oxidising agent. (1 mark)

(c) Explain why 2-methylpropan-2-ol isn’t oxidised under the same conditions. (1 mark)

Answers:

(a)

  • Acidified potassium dichromate(VI). (1)
  • Heat gently and distil the product as it forms. (1)
  • Ethanal has a lower boiling point than ethanol, so it’s removed before it can be oxidised further to ethanoic acid. (1)

(b) Orange to green (1)

(c) It’s a tertiary alcohol. There is no hydrogen atom on the carbon bonded to the OH group. (1)

Question 6: Distinguishing Aldehydes and Ketones (3 marks)

Describe a chemical test to distinguish between propanal and propanone. Include the expected result for each.

Answer:

  • Warm each compound with Tollens’ reagent. (1)
  • Propanal: A silver mirror forms. (1)
  • Propanone: No change. (1)

Alternative: Warm with Fehling’s solution (or Benedict’s solution). Propanal gives a brick-red precipitate. Propanone gives no change, and the solution stays blue.

Question 7: Nucleophilic Addition and Optical Activity (4 marks)

Ethanal reacts with hydrogen cyanide, in the presence of potassium cyanide, to form 2-hydroxypropanenitrile.

(a) Name the type of mechanism. (1 mark)

(b) The product is formed as a racemic mixture. Explain why. (3 marks)

Answers:

(a) Nucleophilic addition (1)

(b)

  • The C=O group in ethanal is planar. (1)
  • The cyanide ion can attack from either side of the plane with equal probability. (1)
  • This forms equal amounts of both optical isomers, so the mixture has no overall effect on plane-polarised light. (1)

Section D: Carboxylic Acid Derivatives and Aromatic Chemistry

Question 8: Acyl Chlorides (4 marks)

(a) Write an equation for the reaction between ethanoyl chloride and ethanol. (1 mark)

(b) Name the type of mechanism. (1 mark)

(c) Give two advantages of using ethanoyl chloride, rather than ethanoic acid, to make this ester. (2 marks)

Answers:

(a) CH₃COCl + CH₃CH₂OH → CH₃COOCH₂CH₃ + HCl (1)

(b) Nucleophilic addition–elimination (1)

(c) Any two of:

  • The reaction is faster. (1)
  • The reaction is not reversible, so it gives a higher yield. (1)
  • No acid catalyst or heating is needed.

Question 9: The Stability of Benzene (4 marks)

The enthalpy change of hydrogenation of cyclohexene is −120 kJ mol⁻¹. The enthalpy change of hydrogenation of benzene is −208 kJ mol⁻¹.

(a) Use these values to calculate how much more stable benzene is than the theoretical “cyclohexa-1,3,5-triene” structure. (2 marks)

(b) Explain why benzene is more stable. (2 marks)

Answers:

(a)

  • Predicted value for three C=C bonds = 3 × (−120) = −360 kJ mol⁻¹ (1)
  • Benzene is more stable by 360 − 208 = 152 kJ mol⁻¹ (1)

(b)

  • Benzene has a ring of delocalised π electrons above and below the plane of the ring. (1)
  • Delocalisation spreads the electron density and lowers the energy, making benzene more stable. (1)

Question 10: Nitration of Benzene (4 marks)

(a) State the reagents and conditions for the nitration of benzene. (2 marks)

(b) Write an equation to show the formation of the electrophile. (1 mark)

(c) Explain why benzene undergoes substitution, rather than addition. (1 mark)

Answers:

(a)

  • Concentrated nitric acid and concentrated sulfuric acid (1)
  • Temperature of about 50 °C (1)

(b) HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻ (1)
(Some exam boards accept HNO₃ + H₂SO₄ → NO₂⁺ + HSO₄⁻ + H₂O.)

(c) Substitution keeps the delocalised ring, so benzene keeps its extra stability. Addition would destroy it. (1)

Section E: Amines, Polymers and Synthesis

Question 11: Basicity of Amines (4 marks)

Put ethylamine, ammonia and phenylamine in order of base strength, strongest first, and explain your answer.

Answer:

  • Order: ethylamine > ammonia > phenylamine (1)
  • Amines act as bases by accepting a proton using the lone pair on nitrogen. (1)
  • In ethylamine, the ethyl group is electron-releasing, which increases the electron density on nitrogen, so the lone pair is more available. (1)
  • In phenylamine, the nitrogen lone pair is delocalised into the benzene ring, so it’s less available to accept a proton. (1)

Question 12: Condensation Polymers (4 marks)

A polyester is made from ethane-1,2-diol, HOCH₂CH₂OH, and benzene-1,4-dicarboxylic acid, HOOC–C₆H₄–COOH.

(a) Name the small molecule eliminated when each ester link forms. (1 mark)

(b) Describe the repeat unit of the polymer. (2 marks)

(c) Explain why polyesters are biodegradable, but poly(alkenes) are not. (1 mark)

Answers:

(a) Water (1)

(b)

  • The repeat unit contains one benzene-1,4-dicarbonyl section and one –OCH₂CH₂O– section. (1)
  • They’re joined by ester links: –CO–O–C₆H₄... written as –[–OC–C₆H₄–COO–CH₂CH₂–O–]–, with bonds extending from each end. (1)

(c) The ester links are polar and can be broken by hydrolysis. Poly(alkenes) have non-polar C–C and C–H bonds, which are very unreactive. (1)

Exam tip: When you draw a repeat unit, show the ester link fully, and include the trailing bonds at each end.

Question 13: Synthesis Route (4 marks)

Suggest a two-step synthesis to convert bromoethane into propanoic acid. Give the reagents and conditions for each step, and name the intermediate.

Answer:

  • Step 1: React with potassium cyanide in ethanol, heated under reflux. (1)
  • The intermediate is propanenitrile, CH₃CH₂CN. (1)
  • Step 2: Hydrolyse the nitrile by heating under reflux with dilute hydrochloric acid. (1)
  • This forms propanoic acid, CH₃CH₂COOH. (1)

Examiner tip: Reacting with cyanide ions increases the length of the carbon chain by one carbon. This is a common route in synthesis questions.

Section F: Analysis and Physical Chemistry

Question 14: Spectroscopy (5 marks)

A compound, X, has the molecular formula C₃H₆O₂.

  • Its infrared spectrum shows a very broad absorption between 2500 and 3300 cm⁻¹ and a strong absorption at about 1710 cm⁻¹.
  • Its ¹H NMR spectrum shows three peaks: a triplet at 1.2 ppm (integration 3), a quartet at 2.4 ppm (integration 2) and a singlet at 11.5 ppm (integration 1).

Identify compound X. Explain how each piece of evidence supports your answer.

Answer:

  • The broad absorption from 2500 to 3300 cm⁻¹ shows an O–H in a carboxylic acid. (1)
  • The absorption at about 1710 cm⁻¹ shows a C=O group. (1)
  • The triplet (3H) and quartet (2H) show an ethyl group, CH₃CH₂–. (1)
  • The singlet at 11.5 ppm (1H) is the –COOH hydrogen. (1)
  • Compound X is propanoic acid, CH₃CH₂COOH. (1)

Question 15: Physical Chemistry in Organic Reactions (8 marks)

(a) The hydrolysis of 2-bromo-2-methylpropane by hydroxide ions has the rate equation:

rate = k[(CH₃)₃CBr]

Explain what this rate equation suggests about the mechanism. (3 marks)

(b) Ethanoic acid and ethanol react to form ethyl ethanoate and water:

CH₃COOH + CH₃CH₂OH ⇌ CH₃COOCH₂CH₃ + H₂O

1.00 mol of ethanoic acid and 1.00 mol of ethanol are mixed with an acid catalyst. At equilibrium, there are 0.67 mol of ethyl ethanoate. Calculate Kc. (3 marks)

(c) 4.6 g of ethanol is oxidised to produce 4.2 g of ethanoic acid. Calculate the percentage yield. (2 marks)

Answers:

(a)

  • Hydroxide ions don’t appear in the rate equation, so they react after the rate-determining step. (1)
  • The rate-determining step involves only the halogenoalkane. (1)
  • This suggests an SN1 mechanism: the C–Br bond breaks first to form a carbocation, which then reacts quickly with OH⁻. (1)

(b)

  • At equilibrium: ethyl ethanoate = water = 0.67 mol, ethanoic acid = ethanol = 1.00 − 0.67 = 0.33 mol (1)
  • Kc = [ester][water] ÷ ([acid][alcohol]). The volume cancels. (1)
  • Kc = (0.67 × 0.67) ÷ (0.33 × 0.33) = 0.4489 ÷ 0.1089 = 4.12 (no units) (1)

(c)

  • Moles of ethanol = 4.6 ÷ 46 = 0.10 mol. The ratio is 1:1, so the theoretical yield of ethanoic acid (Mr = 60) = 0.10 × 60 = 6.0 g (1)
  • Percentage yield = (4.2 ÷ 6.0) × 100 = 70% (1)

How Did You Do?

Add up your marks out of 65:

  • 53 or more: Excellent. Focus on timed past papers to build speed.
  • 39 to 52: Good. Revise the topics where you dropped marks, then retest.
  • 26 to 38: Some gaps. Work through those topics with worksheets before attempting full papers.
  • Below 26: Go back to the core content. Start with knowledge organisers and recall practice, then build up to exam questions.

These bands are a rough guide only, not real grade boundaries.

Paper 2 Exam Technique Tips

1. Learn Reagents and Conditions Precisely

Many marks depend on exact details, such as “acidified potassium dichromate(VI)”, “heat under reflux” or “concentrated sulfuric acid”. Vague answers like “add acid” rarely score.

2. Draw Mechanisms Carefully

Curly arrows must start from a lone pair, a bond or a negative charge, and point exactly to where electrons go. Include partial charges, lone pairs and charges on intermediates.

3. Draw Structures Clearly

Use displayed, structural or skeletal formulae as the question asks. Make sure every carbon has four bonds, and show functional groups fully.

4. Use a Reaction Map for Synthesis Questions

Learn how functional groups convert into one another. For multi-step synthesis questions, work backwards from the product if you’re stuck.

In spectroscopy questions, state what each peak or absorption shows, then give your final structure. Marks are often awarded for each deduction.

6. Give Observations for Tests

Write “a silver mirror forms” or “orange to green”, not just the name of the test.

7. Apply Knowledge to Unfamiliar Molecules

Exams often use molecules you’ve never seen. Identify the functional group, then apply the reactions you know for that group.

The Most Common Paper 2 Mistakes

  • Confusing substitution and elimination conditions for halogenoalkanes
  • Forgetting “distil” vs “reflux” when oxidising alcohols
  • Curly arrows starting from atoms instead of lone pairs or bonds
  • Missing partial charges and lone pairs on mechanisms
  • Giving the minor product instead of the major product in electrophilic addition
  • Drawing repeat units without the correct links or trailing bonds
  • Not linking spectroscopy evidence to specific groups
  • Forgetting to cancel volume in Kc calculations, or adding units when they cancel
  • Missing the colour change in tests for aldehydes and alcohols

How to Revise for A Level Chemistry Paper 2

  1. List your Paper 2 topics from your exam board’s specification.
  2. Build a reaction map showing every functional group conversion, with reagents, conditions and mechanism.
  3. Draw mechanisms from memory until they’re automatic.
  4. Practise spectroscopy problems using IR, mass spectrometry and NMR together.
  5. Use spaced retrieval practice for reagents, conditions and tests.
  6. Practise topic questions with full mark schemes, then move on to full timed papers.
  7. Analyse every paper, noting the type of mistake and the topic, then revise those areas.

Official past papers and mark schemes are available for free on your exam board’s website. Use them alongside fresh practice questions, especially if you’ve already seen the past papers in class.

Our Detailed Revision Guides for Paper 2 Topics

For step-by-step explanations of key Paper 2 topics, read our guides to:

  • Organic reaction mechanisms
  • NMR spectroscopy
  • Rate equations and the rate-determining step
  • A Level Chemistry Paper 1 practice questions and answers

A Level Chemistry Resources for Paper 2

Chemistry Toolkit has teacher-written resources for AS Level and A Level chemistry to help you prepare for every paper:

  • Exam practice with full mock papers and topic tests written to real exam-board style, with mark schemes and grade-boundary guidance
  • Worksheets that build from basics to synoptic stretch questions, with full answers
  • Knowledge organisers summarising reagents, conditions and mechanisms for every organic topic
  • Rapid Recall sets for spaced retrieval practice of reactions and tests
  • Misconception resources that catch common errors before they cost marks

Resources also cover International AS Level and International A Level chemistry. Find out more for students, or see the pricing page for plan details.

Frequently Asked Questions

What is on A Level Chemistry Paper 2?

It depends on your exam board. AQA Paper 2 covers physical and organic chemistry. Edexcel Paper 2 covers advanced organic and physical chemistry. OCR A Paper 2 covers synthesis and analytical techniques.

How long is A Level Chemistry Paper 2?

AQA Paper 2 is 2 hours, Edexcel Paper 2 is 1 hour 45 minutes, and OCR A Paper 2 is 2 hours 15 minutes.

How many marks is A Level Chemistry Paper 2?

AQA Paper 2 is worth 105 marks, Edexcel Paper 2 is worth 90 marks, and OCR A Paper 2 is worth 100 marks.

Is Paper 2 harder than Paper 1?

Many students find Paper 2 harder because of the amount of organic chemistry to remember, including reagents, conditions and mechanisms. Others find Paper 1’s calculations harder. Regular practice with exam-style questions makes both more manageable.

How do I revise organic chemistry for Paper 2?

Build a reaction map of functional group conversions, draw mechanisms from memory, use flashcards for reagents and conditions, and practise synthesis and spectroscopy questions with mark schemes.

Where can I find A Level Chemistry Paper 2 past papers?

Official past papers and mark schemes are available for free on your exam board’s website. This page also includes 15 original exam-style practice questions with answers.

Are these real past paper questions?

No. These are original exam-style questions written to reflect the style and topics of A Level Chemistry Paper 2. Use them alongside official past papers from your exam board.

Conclusion: Prepare for A Level Chemistry Paper 2 With Confidence

A Level Chemistry Paper 2 rewards students who know their reagents and conditions precisely, draw mechanisms accurately and can apply their knowledge to unfamiliar molecules. Use the 15 practice questions on this page to find your weak spots, mark your answers carefully, and revise the topics where you dropped marks.

Build a reaction map, practise mechanisms and spectroscopy regularly, and work up to full timed papers. With consistent practice, Paper 2 becomes a chance to show what you know.

Chemistry Toolkit has A Level chemistry mock papers, topic tests and worksheets with full mark schemes to help you prepare for every paper.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime