Skip to content

← All articles

14 min read

A Level Chemistry Paper 1: Practice Questions and Answers (2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

A Level Chemistry Paper 1 is where many students’ grades are won or lost. It usually combines physical chemistry calculations with inorganic chemistry facts and explanations, so you need to switch quickly between maths, definitions and extended answers.

This guide explains what’s on A Level Chemistry Paper 1 for each exam board, then gives you 15 original exam-style practice questions with full mark-scheme-style answers. The questions cover the topics most often tested on Paper 1, including atomic structure, amount of substance, bonding, energetics, kinetics, equilibria, redox, periodicity, Group 2, the halogens, acids and bases, electrode potentials, thermodynamics and transition metals. You’ll also find exam technique tips and the most common mistakes.

Quick summary: how to use this page

  1. Check which topics your exam board’s Paper 1 covers.
  2. Attempt each question without notes, ideally under timed conditions.
  3. Mark your answers using the mark-scheme-style answers.
  4. Note every mistake, and revise those topics.
  5. Then practise official past papers from your exam board’s website.

What’s on A Level Chemistry Paper 1?

Paper 1 content differs between exam boards, so check your specification.

AQA A Level Chemistry (7405) Paper 1

  • Title: Physical and inorganic chemistry
  • Length: 2 hours
  • Marks: 105
  • Weighting: 35% of the A Level
  • Topics: Relevant physical chemistry topics, such as atomic structure, amount of substance, bonding, energetics, kinetics, equilibria, redox, thermodynamics, electrode potentials and acids and bases, plus all of the inorganic chemistry

Edexcel A Level Chemistry (9CH0) Paper 1

  • Title: Advanced inorganic and physical chemistry
  • Length: 1 hour 45 minutes
  • Marks: 90
  • Weighting: 30% of the A Level

OCR A Level Chemistry A (H432) Paper 1

  • Title: Periodic table, elements and physical chemistry
  • Length: 2 hours 15 minutes
  • Marks: 100
  • Weighting: 37% of the A Level

OCR A Level Chemistry B Salters (H433) Paper 1

  • Title: Fundamentals of chemistry
  • Length: 2 hours 15 minutes
  • Marks: 110
  • Weighting: 41% of the A Level

What Every Paper 1 Has in Common

  • At least 20% of marks across A Level chemistry assess mathematical skills.
  • At least 15% of marks test practical skills, so expect questions on experimental methods and data.
  • Questions mix short answers, calculations and extended responses.

Always check your exam board’s latest specification for the exact topics and paper details.

How to Use These Practice Questions

  • Answer without notes. This gives you an honest picture of what you know.
  • Time yourself. As a rough guide, aim for about one minute per mark, plus a little reading time.
  • Show all working in calculations. Method marks are often available even if your final answer is wrong.
  • Mark strictly using the answers below. Only award a mark if your answer clearly matches.
  • Learn from mistakes. For each question you get wrong, revise the topic, then try a similar question a few days later.

Section A: Atomic Structure and Amount of Substance

Question 1: Ionisation Energies (5 marks)

(a) Explain why the first ionisation energy decreases down Group 2. (3 marks)

(b) Explain why the first ionisation energy of aluminium is lower than that of magnesium. (2 marks)

Answers:

(a)

  • Atomic radius increases down the group, because there are more electron shells. (1)
  • There is more shielding from inner electrons. (1)
  • So there is weaker attraction between the nucleus and the outer electron, and less energy is needed to remove it. (1)

(b)

  • Aluminium’s outer electron is in a 3p subshell, which is higher in energy than magnesium’s 3s subshell. (1)
  • The 3p electron is further from the nucleus and is shielded by the 3s electrons, so it’s easier to remove. (1)

Examiner tip: Don’t say “more protons, so stronger attraction” for part (a). Nuclear charge does increase down the group, but the effects of distance and shielding outweigh it.

Question 2: Titration Calculation (4 marks)

25.0 cm³ of sodium carbonate solution reacts exactly with 22.40 cm³ of 0.100 mol dm⁻³ hydrochloric acid.

Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂

Calculate the concentration of the sodium carbonate solution, in mol dm⁻³.

Answer:

  • Moles of HCl = 0.100 × (22.40 ÷ 1000) = 2.24 × 10⁻³ mol (1)
  • Ratio Na₂CO₃ : HCl = 1 : 2, so moles of Na₂CO₃ = 2.24 × 10⁻³ ÷ 2 = 1.12 × 10⁻³ mol (1)
  • Concentration = 1.12 × 10⁻³ ÷ (25.0 ÷ 1000) (1)
  • = 0.0448 mol dm⁻³ (1)

Question 3: The Ideal Gas Equation (4 marks)

A sample of gas with a mass of 0.500 g occupies 300 cm³ at 100 kPa and 298 K. Calculate the relative molecular mass of the gas.

(R = 8.31 J K⁻¹ mol⁻¹)

Answer:

  • Convert units: p = 100,000 Pa and V = 300 × 10⁻⁶ m³ = 3.00 × 10⁻⁴ m³ (1)
  • n = pV ÷ RT = (100,000 × 3.00 × 10⁻⁴) ÷ (8.31 × 298) (1)
  • n = 30.0 ÷ 2476 = 0.0121 mol (1)
  • Mr = mass ÷ moles = 0.500 ÷ 0.0121 = 41.3 (1)

Examiner tip: The most common mistake is forgetting to convert cm³ into m³ (multiply by 10⁻⁶) and kPa into Pa (multiply by 1000).

Section B: Bonding

Question 4: Shapes of Molecules (4 marks)

Ammonia, NH₃, has a bond angle of 107°.

(a) Name the shape of an ammonia molecule. (1 mark)

(b) Explain why the bond angle in ammonia is smaller than the bond angle in methane, CH₄ (109.5°). (3 marks)

Answers:

(a) Trigonal pyramidal (1)

(b)

  • Ammonia has three bonding pairs and one lone pair of electrons around nitrogen. Methane has four bonding pairs. (1)
  • Lone pairs repel more strongly than bonding pairs. (1)
  • So the bonding pairs in ammonia are pushed closer together, reducing the bond angle. (1)

Question 5: Melting Points Across Period 3 (4 marks)

Explain why silicon has a much higher melting point than sulfur, and why sulfur (S₈) has a higher melting point than chlorine (Cl₂).

Answer:

  • Silicon has a giant covalent structure, so many strong covalent bonds must be broken to melt it. (1)
  • Sulfur and chlorine are simple molecular substances, so only weak London forces between molecules are overcome when they melt. (1)
  • S₈ molecules are larger and have more electrons than Cl₂ molecules. (1)
  • So there are stronger London forces between S₈ molecules, and more energy is needed to overcome them. (1)

Examiner tip: Never say covalent bonds break when a simple molecular substance melts.

Section C: Energetics and Kinetics

Question 6: Hess’s Law (3 marks)

Use the enthalpies of formation below to calculate the enthalpy change for:

4NH₃(g) + 5O₂(g) → 4NO(g) + 6H₂O(g)

  • ΔfH⦵ of NH₃(g) = −46 kJ mol⁻¹
  • ΔfH⦵ of NO(g) = +90 kJ mol⁻¹
  • ΔfH⦵ of H₂O(g) = −242 kJ mol⁻¹

Answer:

  • Products: 4(+90) + 6(−242) = 360 − 1452 = −1092 kJ mol⁻¹ (1)
  • Reactants: 4(−46) + 5(0) = −184 kJ mol⁻¹ (1)
  • ΔrH = (−1092) − (−184) = −908 kJ mol⁻¹ (1)

Question 7: Rate Equations (3 marks)

A reaction is second order with respect to A and zero order with respect to all other reactants. When [A] = 0.020 mol dm⁻³, the rate is 3.2 × 10⁻⁵ mol dm⁻³ s⁻¹.

Calculate the rate constant, k, and give its units.

Answer:

  • rate = k[A]², so k = rate ÷ [A]² (1)
  • k = (3.2 × 10⁻⁵) ÷ (0.020)² = (3.2 × 10⁻⁵) ÷ (4.0 × 10⁻⁴) = 0.080 (1)
  • Units: dm³ mol⁻¹ s⁻¹ (1)

Section D: Equilibria and Acids and Bases

Question 8: Calculating Kc (4 marks)

0.50 mol of hydrogen and 0.50 mol of iodine are sealed in a container and allowed to reach equilibrium:

H₂(g) + I₂(g) ⇌ 2HI(g)

At equilibrium, there are 0.78 mol of HI. Calculate Kc.

Answer:

  • Moles of HI formed = 0.78, so moles of H₂ and I₂ that reacted = 0.78 ÷ 2 = 0.39 mol each (1)
  • Equilibrium moles: H₂ = 0.50 − 0.39 = 0.11 mol, I₂ = 0.11 mol (1)
  • Kc = [HI]² ÷ ([H₂][I₂]). The volume cancels, because there are equal numbers of moles of gas on each side. (1)
  • Kc = 0.78² ÷ (0.11 × 0.11) = 0.6084 ÷ 0.0121 = 50.3 (no units) (1)

Question 9: pH Calculations (5 marks)

(a) Calculate the pH of 0.020 mol dm⁻³ hydrochloric acid. (1 mark)

(b) Calculate the pH of 0.100 mol dm⁻³ ethanoic acid. Ka = 1.74 × 10⁻⁵ mol dm⁻³. (3 marks)

(c) State one assumption you made in part (b). (1 mark)

Answers:

(a) HCl is a strong acid, so [H⁺] = 0.020 mol dm⁻³. pH = −log(0.020) = 1.70 (1)

(b)

  • Ka = [H⁺]² ÷ [CH₃COOH] (1)
  • [H⁺] = √(1.74 × 10⁻⁵ × 0.100) = √(1.74 × 10⁻⁶) = 1.32 × 10⁻³ mol dm⁻³ (1)
  • pH = −log(1.32 × 10⁻³) = 2.88 (1)

(c) Any one of: the concentration of acid at equilibrium is the same as the starting concentration, because very little dissociates; or [H⁺] = [CH₃COO⁻], ignoring H⁺ from water. (1)

Section E: Redox and Electrode Potentials

Question 10: Oxidation States and Half Equations (3 marks)

(a) State the oxidation state of manganese in MnO₄⁻. (1 mark)

(b) Write a half equation for the reduction of MnO₄⁻ to Mn²⁺ in acidic solution. (2 marks)

Answers:

(a) +7 (1)

(b) MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O

  • Correct species (1)
  • Balanced atoms and charge (1)

Question 11: Electrochemical Cells (3 marks)

A cell is made from a Zn²⁺/Zn half-cell and a Cu²⁺/Cu half-cell.

  • E⦵ (Zn²⁺/Zn) = −0.76 V
  • E⦵ (Cu²⁺/Cu) = +0.34 V

(a) Calculate the EMF of the cell. (1 mark)

(b) State the direction of electron flow in the external circuit, and explain your answer. (2 marks)

Answers:

(a) EMF = E(positive electrode) − E(negative electrode) = 0.34 − (−0.76) = +1.10 V (1)

(b)

  • Electrons flow from the zinc electrode to the copper electrode. (1)
  • Zinc has the more negative electrode potential, so it’s more easily oxidised and releases electrons. (1)

Section F: Inorganic Chemistry

Question 12: Group 2 (4 marks)

(a) Describe the trend in solubility of the Group 2 hydroxides down the group. (1 mark)

(b) Describe a test for sulfate ions, including the result. (2 marks)

(c) Explain why barium sulfate can be given to patients for X-rays, even though barium ions are toxic. (1 mark)

Answers:

(a) Solubility increases down the group. (1)

(b)

  • Add acidified barium chloride solution. (1)
  • A white precipitate forms. (1)

(c) Barium sulfate is insoluble, so it isn’t absorbed into the blood. (1)

Question 13: Halide Ions (4 marks)

A student adds acidified silver nitrate solution to three solutions, each containing a different halide ion.

(a) State the colour of the precipitate formed with chloride, bromide and iodide ions. (1 mark)

(b) Describe how ammonia solution can be used to confirm which halide is present. (3 marks)

Answers:

(a) Chloride: white. Bromide: cream. Iodide: yellow. (1) (All three needed.)

(b)

  • The silver chloride precipitate dissolves in dilute ammonia. (1)
  • The silver bromide precipitate dissolves in concentrated ammonia, but not dilute. (1)
  • The silver iodide precipitate doesn’t dissolve in concentrated ammonia. (1)

Examiner tip: The silver nitrate is acidified with dilute nitric acid to remove other ions, such as carbonate, that would also form precipitates. Don’t use hydrochloric acid, because it adds chloride ions.

Question 14: Thermodynamics and Feasibility (4 marks)

For the decomposition of calcium carbonate:

CaCO₃(s) → CaO(s) + CO₂(g)

ΔH = +178 kJ mol⁻¹ and ΔS = +161 J K⁻¹ mol⁻¹

(a) Explain why ΔS is positive. (1 mark)

(b) Calculate the minimum temperature at which the reaction becomes feasible. (3 marks)

Answers:

(a) A gas is produced from a solid, so the products are more disordered. (1)

(b)

  • The reaction becomes feasible when ΔG = ΔH − TΔS ≤ 0, so T = ΔH ÷ ΔS (1)
  • Convert units: ΔH = 178,000 J mol⁻¹ (1)
  • T = 178,000 ÷ 161 = 1106 K (1)

Examiner tip: ΔH is usually given in kJ mol⁻¹ and ΔS in J K⁻¹ mol⁻¹. Always convert ΔH into J mol⁻¹ before dividing.

Question 15: Transition Metals (5 marks)

When concentrated hydrochloric acid is added to a solution containing [Cu(H₂O)₆]²⁺ ions, the solution changes from blue to yellow.

(a) Write the formula of the copper complex formed. (1 mark)

(b) State the shape and coordination number of the new complex. (2 marks)

(c) Explain why the coordination number changes. (1 mark)

(d) Explain why transition metal complexes are coloured. (1 mark)

Answers:

(a) [CuCl₄]²⁻ (1)

(b)

  • Tetrahedral (1)
  • Coordination number 4 (1)

(c) Chloride ions are larger than water molecules, so fewer of them fit around the central copper ion. (1)

(d) The d orbitals split into different energy levels, and the complex absorbs light of a particular frequency as electrons move to a higher d-orbital energy level. The colour seen is the light that isn’t absorbed. (1)

How Did You Do?

Add up your marks out of 64:

  • 52 or more: Excellent. Focus on timed past papers to build speed.
  • 38 to 51: Good. Revise the topics where you dropped marks, then retest.
  • 26 to 37: Some gaps. Work through those topics with worksheets before attempting full papers.
  • Below 26: Go back to the core content. Start with knowledge organisers and recall practice, then build up to exam questions.

These bands are a rough guide only, not real grade boundaries.

Paper 1 Exam Technique Tips

1. Show Every Step of Every Calculation

Write the equation, substitute values, then calculate. Mark schemes award method marks, and error carried forward can still give you credit if an early step is wrong.

2. Convert Units Before Calculating

Check for cm³ to dm³ or m³, kPa to Pa, kJ to J, and °C to K. Unit mistakes are one of the most common causes of lost marks on Paper 1.

3. Learn Definitions Word for Word

Ionisation energy, enthalpy of formation, Kc, Ka, standard electrode potential and many other definitions are reliable marks, but only if they’re precise.

4. Use the Marks as a Guide

A 3-mark explanation usually needs three separate, linked points.

5. Give Observations, Not Just Tests

For inorganic tests, always state what you would see, such as “a white precipitate forms”.

6. Use Precise Chemical Language

Write “London forces between molecules”, not “weak bonds”. Write “a greater proportion of molecules have energy equal to or greater than the activation energy”, not “particles move faster”.

7. Manage Your Time

Paper 1 is long. Don’t let one difficult calculation take too long. Mark it, move on and return at the end.

The Most Common Paper 1 Mistakes

  • Forgetting to convert units in ideal gas, thermodynamics and concentration calculations
  • Using the wrong ratio from a balanced equation
  • Including units for Kc when they cancel
  • Using the wrong formula for EMF, or getting the sign wrong
  • Writing unbalanced half equations, especially charge
  • Saying covalent bonds break when simple molecular substances melt
  • Giving incomplete ionisation energy explanations, without mentioning shielding or distance
  • Not giving observations for inorganic tests
  • Rounding too early in multi-step calculations

How to Revise for A Level Chemistry Paper 1

  1. List your Paper 1 topics from your exam board’s specification.
  2. Rate each topic as secure, partly secure or weak.
  3. Revise weak topics first, using knowledge organisers and active recall.
  4. Practise topic questions with full mark schemes.
  5. Use spaced retrieval practice to keep earlier topics fresh.
  6. Move on to full papers under timed conditions in the final weeks.
  7. Analyse every paper, noting the type of mistake and the topic, then revise those areas.

Official past papers and mark schemes are available for free on your exam board’s website. Use them alongside fresh practice questions, especially if you’ve already seen the past papers in class.

Our Detailed Revision Guides for Paper 1 Topics

For step-by-step explanations of key Paper 1 topics, read our guides to:

  • Hess’s law and enthalpy calculations
  • Born–Haber cycles
  • Rate equations and the rate-determining step
  • The Maxwell–Boltzmann distribution

A Level Chemistry Resources for Paper 1

Chemistry Toolkit has teacher-written resources for AS Level and A Level chemistry to help you prepare for every paper:

  • Exam practice with full mock papers and topic tests written to real exam-board style, with mark schemes and grade-boundary guidance
  • Worksheets that build from basics to synoptic stretch questions, with full answers
  • Knowledge organisers for every physical and inorganic chemistry topic
  • Rapid Recall sets for spaced retrieval practice
  • Misconception resources that catch common errors before they cost marks

Resources also cover International AS Level and International A Level chemistry. Find out more for students, or see the pricing page for plan details.

Frequently Asked Questions

What is on A Level Chemistry Paper 1?

It depends on your exam board. AQA Paper 1 covers physical and inorganic chemistry. Edexcel Paper 1 covers advanced inorganic and physical chemistry. OCR A Paper 1 covers the periodic table, elements and physical chemistry.

How long is A Level Chemistry Paper 1?

AQA Paper 1 is 2 hours, Edexcel Paper 1 is 1 hour 45 minutes, and OCR A and OCR B Paper 1 are both 2 hours 15 minutes.

How many marks is A Level Chemistry Paper 1?

AQA Paper 1 is worth 105 marks, Edexcel Paper 1 is worth 90 marks, OCR A Paper 1 is worth 100 marks, and OCR B Paper 1 is worth 110 marks.

Is A Level Chemistry Paper 1 hard?

Paper 1 is challenging because it mixes calculations, definitions and extended explanations. Regular practice with exam-style questions and mark schemes makes it much more manageable.

Where can I find A Level Chemistry Paper 1 past papers?

Official past papers and mark schemes are available for free on your exam board’s website. This page also includes 15 original exam-style practice questions with answers.

How should I revise for A Level Chemistry Paper 1?

Identify your weak topics, revise them with active recall, practise topic questions with mark schemes, then complete full timed papers. Analyse every mistake and revisit those topics.

How much maths is on A Level Chemistry Paper 1?

At least 20% of the marks across A Level chemistry assess mathematical skills. Paper 1 usually includes many calculations, such as moles, enthalpy changes, rate constants, Kc, pH and electrode potentials.

Are these real past paper questions?

No. These are original exam-style questions written to reflect the style and topics of A Level Chemistry Paper 1. Use them alongside official past papers from your exam board.

Conclusion: Prepare for A Level Chemistry Paper 1 With Confidence

A Level Chemistry Paper 1 rewards students who combine accurate calculations, precise definitions and clear explanations. Use the 15 practice questions on this page to find your weak spots, mark your answers carefully, and revise the topics where you dropped marks.

Then build up to full timed papers, and analyse every mistake. With consistent practice, Paper 1 becomes a chance to pick up marks rather than lose them.

Chemistry Toolkit has A Level chemistry mock papers, topic tests and worksheets with full mark schemes to help you prepare for every paper.

Start your free Chemistry Toolkit trial today →

3 days. 10 free downloads. Cancel anytime.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime