Skip to content

← All articles

16 min read

A Level Biology Practicals: Complete Revision Guide to Required Practicals (2026)

Chemistry Toolkit TeamWritten and reviewed by practising chemistry teachers

On this page

Last updated: October 2026

A Level biology practicals are tested far beyond the lab. Questions on microscopy, enzyme investigations, osmosis, aseptic technique, chromatography and statistics appear across your written exams, and they reward students who understand why each step is done, not just what to do.

This guide covers the major A Level biology practical techniques: microscopy and mitosis, enzyme investigations, water potential, membrane permeability, dissection, aseptic technique, chromatography, photosynthesis and respiration investigations, animal behaviour, colorimetry, ecological sampling and food tests. For each one, you’ll find the method, the reasons behind key steps and the questions examiners ask. It also covers variables, statistics, the practical endorsement and exam-style questions with answers.

Quick summary: A Level biology practicals

  • AQA has 12 required practicals. OCR groups practicals into Practical Activity Groups (PAGs). Edexcel uses core practicals.
  • In England, practical competence is assessed by your teacher through the practical endorsement, reported separately from your grade.
  • Written exams test practical skills, including methods, variables, data analysis and statistical tests.
  • Examiners focus on controls, variables, reliability, ethics and the reasons behind each step.

How Practicals Are Assessed in A Level Biology

The Practical Endorsement

In England, A Level biology students complete practical activities throughout the course. Teachers assess them against the Common Practical Assessment Criteria (CPAC):

  1. Follows written procedures
  2. Applies investigative approaches and methods when using instruments and equipment
  3. Safely uses a range of practical equipment and materials
  4. Makes and records observations
  5. Researches, references and reports

The endorsement is reported separately from your A Level grade, so keep a clear, complete lab book.

Practical Skills in the Written Exams

Written exam questions on practicals often ask you to:

  • Describe or evaluate a method
  • Identify independent, dependent and control variables
  • Explain why a control is needed
  • Process data and calculate rates, percentages or means
  • Choose and interpret a statistical test
  • Suggest improvements to an investigation
  • Discuss ethical issues, such as using animals

Key Practical Vocabulary

  • Independent variable: The variable you change.
  • Dependent variable: The variable you measure.
  • Control variables: Variables kept the same, so they don’t affect the results.
  • Control experiment: An experiment without the factor being tested, to show that any effect is caused by that factor. For example, using boiled enzyme.
  • Accurate: Close to the true value.
  • Precise: Repeated measurements are close together.
  • Repeatable: The same person gets similar results using the same method.
  • Reproducible: Different people, or different methods, give similar results.
  • Valid: The investigation measures what it claims to, with only the independent variable changed.
  • Resolution: The smallest change an instrument can detect.
  • Anomalous result: A result that doesn’t fit the pattern.

Exam tip: “Control variable” and “control experiment” mean different things. Use the right one.

1. Microscopy and Mitosis

AQA: Required Practical 2

Preparing a Root Tip Squash

  1. Cut the tip of a growing root, about 1 to 2 mm long. This is the meristem, where cells divide.
  2. Place it in warm hydrochloric acid for a few minutes. This stops cell division and breaks down the middle lamella, so the cells separate.
  3. Rinse, then add a stain, such as toluidine blue or acetic orcein, which stains chromosomes.
  4. Place the tip on a slide, add a coverslip, and squash gently to spread the cells into a single layer.
  5. View with a microscope, starting on low power.

Using the Microscope

  • Start with the lowest-power objective lens and focus with the coarse focus.
  • Move to higher power and use only the fine focus.
  • Never use the coarse focus on high power, as you could break the slide.

Calculating the Mitotic Index

Mitotic index = number of cells in mitosis ÷ total number of cells

Example: 30 cells are in mitosis, out of 200 cells counted.
Mitotic index = 30 ÷ 200 = 0.15

Measuring Cell Size With a Graticule

An eyepiece graticule has a scale with no units. You calibrate it using a stage micrometer, which has a known scale.

Example: 10 stage micrometer divisions (each 10 µm, so 100 µm in total) line up with 40 eyepiece units.
1 eyepiece unit = 100 ÷ 40 = 2.5 µm

Important: Recalibrate every time you change the objective lens.

Magnification

Magnification = image size ÷ actual size

Make sure both sizes are in the same units before calculating. Remember: 1 mm = 1000 µm.

2. Enzyme Investigations

AQA: Required Practical 1

Example Investigations

  • The effect of temperature, pH or substrate concentration on the rate of an enzyme-controlled reaction
  • Catalase breaking down hydrogen peroxide, measured by the volume of oxygen produced
  • Amylase breaking down starch, measured by the time taken for starch to disappear, tested with iodine at regular intervals

Key Method Points

  • Use a water bath to keep the temperature constant.
  • Let the enzyme and substrate reach the set temperature separately before mixing.
  • Use buffer solutions to control pH.
  • Keep the volumes and concentrations of enzyme and substrate constant, except for the variable being tested.
  • Repeat each condition at least three times and calculate a mean.

Calculating Rate

  • If you measure the time for a reaction to finish, rate = 1 ÷ time.
  • If you measure product over time, the initial rate is the gradient of a tangent drawn at time zero.

Control

Use boiled (denatured) enzyme, to show that any reaction is caused by the active enzyme.

3. Water Potential and Osmosis

AQA: Required Practical 3

Method

  1. Make a dilution series of sucrose solutions, such as 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0 mol dm⁻³.
  2. Cut equal-sized cylinders of plant tissue, such as potato, using a cork borer.
  3. Blot each cylinder dry and record its starting mass.
  4. Place one cylinder in each solution for a set time, such as 30 minutes, at a constant temperature.
  5. Remove, blot dry and record the final mass.
  6. Calculate the percentage change in mass for each concentration.
  7. Plot percentage change in mass against sucrose concentration.
  8. The concentration where the line crosses the x-axis (no change in mass) has the same water potential as the plant tissue.

Percentage Change in Mass

Percentage change = ((final mass − initial mass) ÷ initial mass) × 100

Use percentage change, not just mass change, because the cylinders may not start with exactly the same mass.

Making a Dilution Series

Use C₁V₁ = C₂V₂.

Example: To make 10 cm³ of 0.2 mol dm⁻³ sucrose from a 1.0 mol dm⁻³ stock:
V₁ = (0.2 × 10) ÷ 1.0 = 2 cm³ of stock, plus 8 cm³ of distilled water.

Why Blot the Cylinders?

To remove excess solution from the surface, so only water taken up or lost by the tissue affects the mass.

4. Membrane Permeability

AQA: Required Practical 4

Method

  1. Cut equal-sized discs of beetroot.
  2. Rinse them in distilled water to remove pigment released from cells damaged by cutting.
  3. Place the discs in distilled water at different temperatures (or in different concentrations of ethanol) for a set time.
  4. Remove the discs, and measure the colour of the water using a colorimeter.
  5. Higher absorbance means more pigment has leaked out, so the membrane is more permeable.

Explaining the Results

As temperature increases:

  • Phospholipids gain kinetic energy and move more, making the membrane more fluid.
  • At high temperatures, membrane proteins denature, leaving gaps in the membrane.
  • More pigment leaks out, so absorbance increases.

Using a Colorimeter

  • Calibrate with distilled water, setting it to zero absorbance (or 100% transmission).
  • Use a suitable colour filter.
  • Use the same type of cuvette, with clear sides facing the light beam.

5. Dissection

AQA: Required Practical 5

Safety and Technique

  • Cut away from your body, onto a cutting board or dissecting tray.
  • Use sharp instruments. Blunt scalpels are more likely to slip.
  • Wear gloves, and wash your hands afterwards.
  • Dispose of tissue correctly.

Ethical Issues

Exam questions may ask you to discuss the ethics of dissection, such as:

  • Whether animals were raised and killed humanely
  • Whether models or simulations could be used instead
  • The educational benefits of seeing real tissues

Biological Drawing Rules

  • Use a sharp pencil.
  • Draw clear, continuous lines, with no shading.
  • Draw only what you see, at a suitable size.
  • Use straight label lines that don’t cross, drawn with a ruler.
  • Include a title and the magnification or scale.

6. Aseptic Technique and Antimicrobial Substances

AQA: Required Practical 6

Aseptic Technique

  1. Disinfect the work surface.
  2. Work near a lit Bunsen burner. The rising hot air carries microorganisms away from your work.
  3. Sterilise inoculating loops by heating them until red hot, then let them cool.
  4. Flame the neck of bottles after opening and before closing.
  5. Lift the lid of the agar plate only slightly, and for as short a time as possible.
  6. Secure the lid with two strips of tape, not all the way round, so oxygen can still enter and harmful anaerobic bacteria don’t grow.
  7. Incubate upside down at about 25 °C, which is below human body temperature, reducing the risk of growing pathogens.

Investigating Antimicrobial Substances

  1. Spread a bacterial culture evenly across an agar plate.
  2. Place paper discs soaked in different antimicrobial substances on the agar, plus a control disc soaked in sterile water.
  3. Incubate the plate.
  4. Measure the clear zone of inhibition around each disc.

Area of the clear zone = πr²

A larger clear zone usually means a more effective antimicrobial substance.

7. Chromatography of Photosynthetic Pigments

AQA: Required Practical 7

Method

  1. Grind leaves with a solvent, such as propanone, and a little sand to extract the pigments.
  2. Draw a pencil baseline on chromatography paper or a TLC plate.
  3. Spot the extract repeatedly on the same point, letting it dry between spots, to make a concentrated spot.
  4. Place in a beaker with solvent below the baseline, and cover.
  5. Remove when the solvent is near the top, and mark the solvent front.
  6. Calculate Rf values for each pigment.

Rf = distance moved by pigment ÷ distance moved by solvent

Why Each Step Matters

  • Pencil baseline: It doesn’t dissolve in the solvent.
  • Concentrated spot: Makes pigments easier to see after separation.
  • Solvent below the baseline: Stops the pigments dissolving directly into the solvent.
  • Covering the beaker: Stops the solvent evaporating from the paper.

Different pigments, such as chlorophyll a, chlorophyll b and carotenoids, have different Rf values, so they can be identified.

8. Dehydrogenase Activity in Chloroplasts

AQA: Required Practical 8

Method

  1. Grind leaves in an ice-cold, isotonic buffer solution, then filter and centrifuge to isolate the chloroplasts.
  2. Add DCPIP, a blue dye that turns colourless when it’s reduced.
  3. Expose the chloroplasts to light, and measure the colour change over time using a colorimeter.
  4. Investigate a factor, such as light intensity, by changing the distance from a light source.

Why Each Step Matters

  • Ice-cold: Reduces the activity of enzymes that would damage the chloroplasts.
  • Isotonic: Prevents water moving into or out of the chloroplasts by osmosis, which could damage them.
  • Buffer: Keeps the pH constant, so enzymes aren’t denatured.

What the Results Show

In the light-dependent reaction, electrons from chlorophyll reduce DCPIP instead of NADP. The faster the DCPIP decolourises, the faster the rate of the light-dependent reaction.

Control: Keep a tube of chloroplasts and DCPIP in the dark. It should stay blue.

9. Respiration in Single-Celled Organisms

AQA: Required Practical 9

Example Investigation

Investigating the effect of temperature or respiratory substrate on the rate of respiration in yeast.

Methods

  • Gas collection: Measure the volume of carbon dioxide produced, using a gas syringe or by counting bubbles.
  • Respirometer: Measure oxygen uptake. Soda lime (or potassium hydroxide) absorbs the carbon dioxide produced, so any change in volume is caused by oxygen being used.
  • Redox indicators: Methylene blue changes from blue to colourless when reduced, so it can show the rate of respiration.

Key Method Points

  • Use a water bath to control temperature.
  • Let the yeast suspension equilibrate to the temperature before taking measurements.
  • Use a control with boiled yeast, to show that the results are caused by living cells.

10. Animal Behaviour: Choice Chambers and Mazes

AQA: Required Practical 10

Choice Chamber

A choice chamber lets small invertebrates, such as woodlice or maggots, move between different conditions.

  • Create dry conditions using a drying agent, such as anhydrous calcium chloride, and humid conditions using water.
  • Create light and dark conditions by covering half of the chamber.
  • Count the animals in each area after a set time.

Ethical Considerations

  • Handle animals carefully, using a soft paintbrush or pooter.
  • Limit the time they spend in the chamber.
  • Return them to their natural habitat afterwards.

Statistical Test

Use a chi-squared test to find out whether the distribution of animals is significantly different from what would be expected by chance.

11. Colorimetry and Calibration Curves

AQA: Required Practical 11

Finding the Glucose Concentration of an Unknown Solution

  1. Make a dilution series of glucose solutions of known concentrations.
  2. Carry out the Benedict’s test on each one, using the same volume of Benedict’s reagent and the same heating time.
  3. Remove the precipitate, then measure the absorbance (or transmission) of the remaining solution in a colorimeter.
  4. Plot a calibration curve of absorbance against glucose concentration.
  5. Test the unknown solution in the same way, and use the calibration curve to read off its concentration.

Why use the same volumes and heating time? So the only variable affecting the results is the glucose concentration.

12. Ecological Sampling

AQA: Required Practical 12

Random Sampling With Quadrats

Use random sampling when you want to estimate the population of a species in an area without bias.

  1. Lay out two tape measures at right angles to form a grid.
  2. Use a random number generator to choose coordinates.
  3. Place a quadrat at each coordinate.
  4. Record percentage cover, frequency or number of individuals.
  5. Use enough quadrats to give representative results.

Systematic Sampling With Transects

Use a belt or line transect when you want to see how species change along an environmental gradient, such as from a woodland edge into a field.

  • Place quadrats at regular intervals along the transect.
  • Measure abiotic factors, such as light intensity or soil moisture, at each point.

Statistical Test

Use Spearman’s rank correlation coefficient to see whether there’s a significant correlation between an abiotic factor and the distribution of a species.

Other Common Practical Techniques

Food Tests

  • Starch: Iodine solution changes from orange-brown to blue-black.
  • Reducing sugars: Heat with Benedict’s reagent. A green, yellow, orange or brick-red precipitate forms, depending on the concentration.
  • Non-reducing sugars: If the Benedict’s test is negative, boil with dilute hydrochloric acid, neutralise with sodium hydrogencarbonate, then repeat the Benedict’s test. A coloured precipitate now forms.
  • Proteins: Biuret reagent changes from blue to purple.
  • Lipids: Shake with ethanol, then add water. A white emulsion forms.

Potometers and Transpiration

A potometer measures water uptake by a plant shoot, which is used to estimate the rate of transpiration.

  • Cut the shoot underwater, so air doesn’t enter the xylem.
  • Assemble the potometer underwater, and seal joints with petroleum jelly.
  • Keep conditions constant while measuring, then change one factor, such as light or air movement.

Statistical Tests in A Level Biology

Choosing the correct statistical test is a common exam question.

  • Chi-squared test: Use for categorical data, to compare observed and expected frequencies. Example: Numbers of woodlice in light and dark areas.
  • Student’s t-test: Use to compare the means of two groups. Example: Leaf length in sun and shade.
  • Spearman’s rank correlation coefficient: Use to test for a correlation between two variables. Example: Light intensity and plant density.

Interpreting a Statistical Test

  1. State a null hypothesis, which says there is no significant difference or correlation.
  2. Calculate the test statistic.
  3. Compare it with the critical value at the 0.05 probability level.
  4. If the calculated value is greater than or equal to the critical value, reject the null hypothesis. The result is significant, and there’s less than a 5% probability it happened by chance.
  5. If it’s smaller, accept the null hypothesis.

Safety and Risk Assessment

  • Scalpels and sharp tools: Cut away from the body, onto a hard surface.
  • Microorganisms: Use aseptic technique, incubate at 25 °C and never open plates after incubation.
  • Chemicals, such as hydrochloric acid or stains: Wear eye protection and gloves.
  • Flammable solvents, such as propanone or ethanol: Keep away from naked flames.
  • Hot water baths: Handle carefully to avoid burns.
  • Living organisms: Handle animals ethically and return them to their habitat.

Exam tip: Always link a precaution to a specific hazard, such as “wear goggles because hydrochloric acid is corrosive”.

Exam-Style Practice Questions

Try these, then check the answers below.

  1. Explain why a root tip is placed in warm hydrochloric acid before staining. (2 marks)
  2. In a root tip squash, 24 cells out of 160 are in mitosis. Calculate the mitotic index. (1 mark)
  3. Explain why percentage change in mass is used in water potential investigations. (1 mark)
  4. Describe a suitable control for an investigation into the effect of temperature on the activity of amylase. (1 mark)
  5. Explain why agar plates are incubated at 25 °C, not 37 °C. (1 mark)
  6. Explain why chloroplasts are extracted in an ice-cold, isotonic buffer. (3 marks)
  7. Which statistical test would you use to compare the mean heart rate of two groups of students, and why? (2 marks)
  8. Explain why beetroot discs are rinsed in distilled water before a membrane permeability investigation. (1 mark)
  9. A student wants to see whether the number of daisies changes with distance from a tree. Suggest a suitable sampling method. (1 mark)
  10. Describe how you would show that a solution contains a non-reducing sugar. (3 marks)

Answers

  1. The acid stops cell division and breaks down the middle lamella, separating the cells so they can be spread into a single layer. (2)
  2. 24 ÷ 160 = 0.15 (1)
  3. The tissue samples may not start with the same mass, so percentage change allows a fair comparison. (1)
  4. Use boiled (denatured) amylase, kept at the same temperatures, with the same starch solution. (1)
  5. A lower temperature reduces the risk of growing human pathogens. (1)
  6. Ice-cold reduces enzyme activity that could damage the chloroplasts. Isotonic prevents water moving in or out by osmosis, so the chloroplasts don’t burst or shrink. The buffer keeps the pH constant, so proteins aren’t denatured. (3)
  7. A Student’s t-test, because it compares the means of two groups. (2)
  8. To remove pigment released from cells damaged during cutting, so only pigment leaking during the investigation is measured. (1)
  9. A belt or line transect, with quadrats at regular intervals from the tree. (1)
  10. Do a Benedict’s test first, which stays blue (negative). Then boil a fresh sample with dilute hydrochloric acid, neutralise with sodium hydrogencarbonate, and repeat the Benedict’s test. A coloured precipitate shows a non-reducing sugar is present. (3)

The Most Common Practical Mistakes in Biology Exams

  • Confusing control variables with control experiments
  • Vague safety answers not linked to a hazard
  • Forgetting to calibrate the eyepiece graticule for each objective lens
  • Using mass change instead of percentage change in mass
  • Choosing the wrong statistical test
  • Saying a result is “proven” instead of “significant at the 0.05 level”
  • Not explaining why each step is done when asked
  • Breaking biological drawing rules, such as shading or crossing label lines
  • Forgetting ethical considerations in investigations using animals

How to Revise A Level Biology Practicals

  1. List the practicals on your exam board’s specification.
  2. For each practical, learn the method, the reason for each step, the variables, the control and the hazards.
  3. Practise calculations, including mitotic index, magnification, graticule calibration, percentage change, rate and area of clear zones.
  4. Learn when to use each statistical test, and how to interpret the results.
  5. Practise biological drawings using the drawing rules.
  6. Use exam questions that ask you to evaluate or improve methods.
  7. Use spaced retrieval practice to keep methods, tests and statistics fresh.

Studying A Level Chemistry Too?

Many A Level biology students also take A Level chemistry, where practical skills such as titrations, colorimetry, chromatography and uncertainty calculations come up again.

Chemistry Toolkit has teacher-written resources for AS Level and A Level chemistry, including worksheets, knowledge organisers, Rapid Recall sets and exam practice with full mark schemes. Read our guide to A Level chemistry practicals for a step-by-step look at the chemistry required practicals.

Every Chemistry Toolkit plan starts with a 3-day free trial with 10 free downloads.

Frequently Asked Questions

How many required practicals are there in A Level biology?

AQA A Level biology has 12 required practicals. OCR organises its practicals into Practical Activity Groups (PAGs), and Edexcel uses core practicals. Check your specification for the full list.

Are A Level biology practicals examined?

Yes. Practical skills are tested in the written exams, through questions on methods, variables, data analysis and statistics. In England, practical competence is also assessed separately through the practical endorsement.

How do you calculate the mitotic index?

Divide the number of cells in mitosis by the total number of cells observed.

How do you calibrate an eyepiece graticule?

Line up the eyepiece graticule with a stage micrometer, which has a known scale. Work out how many micrometres one eyepiece unit represents, and recalibrate for each objective lens.

Which statistical test should I use in A Level biology?

Use chi-squared for categorical frequency data, a Student’s t-test to compare two means, and Spearman’s rank to test for a correlation between two variables.

Why are agar plates incubated at 25 °C?

Incubating at 25 °C reduces the risk of growing pathogens that thrive at human body temperature, around 37 °C.

What is the difference between a control variable and a control experiment?

A control variable is kept the same throughout an investigation. A control experiment is set up without the factor being tested, such as using boiled enzyme, to show that any effect is caused by that factor.

What are the rules for biological drawings?

Use a sharp pencil, clear continuous lines and no shading. Use ruled label lines that don’t cross, and include a title and magnification.

Conclusion: Master A Level Biology Practicals

A Level biology practicals reward students who understand the purpose of every step. Learn the method for each practical, know your variables and controls, link safety precautions to specific hazards, and practise calculations and statistical tests until they’re automatic.

With these skills, practical questions become some of the most predictable marks in your A Level biology exams.

Put this into practice tomorrow

The retrieval sets, misconception packs and exam-style questions mentioned above are all in the library - start a free trial and download 10 of them today.

3-day free trial with 10 free downloads · Cancel anytime